RCD 'T-Box' v1.0 rev 4 - (RX5808 Pro Diversity OLED)
author: tupoar
2 layer board of 3.84 x 2.15 inches (97.5 x 54.5 mm)
Uploaded:
October 07, 2015
Shared:
October 07, 2015
Total Price:
$41.15
Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 4:
- Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.
Rev 3.1:
Minor adjustments to routing
Minor changes to 100k pull down resistors.
Rev 3:
Fixed hole spacing for Pro Mini
Fixed DTR, TX, RX etc ports as they were reversed
Swapped Up and Down Buttons.
Added 100K pull down resistors on RSSI lines
Added extra ground and vcc points for pro mini
Corrected A5 and A4 conenctions
Rev 2:
- Repositioned via holes
Rev 1:
- Initial version
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md
Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 4:
- Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.
Rev 3.1:
Minor adjustments to routing
Minor changes to 100k pull down resistors.
Rev 3:
Fixed hole spacing for Pro Mini
Fixed DTR, TX, RX etc ports as they were reversed
Swapped Up and Down Buttons.
Added 100K pull down resistors on RSSI lines
Added extra ground and vcc points for pro mini
Corrected A5 and A4 conenctions
Rev 2:
- Repositioned via holes
Rev 1:
- Initial version
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md
