ESP8266TeensyAdd-On.v02
author: PeskyProducts
2 layer board of 0.71 x 0.86 inches (18.0 x 21.7 mm)
Uploaded:
May 21, 2015
Shared:
May 21, 2015
Total Price:
$3.00
Simple breakout board for the ESP8266 chip to provide wifi capability to the Teensy 3.1. Designed to take power from VIN via USB or LiPo battery and convert to 3V3 with a TLV7333 300 mA voltage regulator. Also on board is a Macronix 4 Mbit MX254006E SPI Flash memory chip. Small rgb led indicates power on, pcb antenna matched to 2.4 GHz. Can use either 26 or 40 MHz Seiko Epson crystal. The board has the same eight pins as the cheap Chinese modules as a first cut to see how hard it is to add wifi to Teensy 3.1 projects. The board is designed to solder directly on top of the Teensy just above the USB plug. Added led on TX, broke out five more GPIO pins including SPI port.
Simple breakout board for the ESP8266 chip to provide wifi capability to the Teensy 3.1. Designed to take power from VIN via USB or LiPo battery and convert to 3V3 with a TLV7333 300 mA voltage regulator. Also on board is a Macronix 4 Mbit MX254006E SPI Flash memory chip. Small rgb led indicates power on, pcb antenna matched to 2.4 GHz. Can use either 26 or 40 MHz Seiko Epson crystal. The board has the same eight pins as the cheap Chinese modules as a first cut to see how hard it is to add wifi to Teensy 3.1 projects. The board is designed to solder directly on top of the Teensy just above the USB plug. Added led on TX, broke out five more GPIO pins including SPI port.
