Shared Projects by jterryc

Shared Projects by jterryc

Layout-Input-Monitor-2

2 layer board of 2.90 x 1.25 inches (73.7 x 31.8 mm)
Uploaded: October 1st 2022
Shared: February 2nd 2023
Total Price: $18.10

This unit, based on an Arduino module, provides the same capabilities as an NCE Auxiliary Input Unit. Fourteen inputs are available to report the position of turnouts or for connection to block occupancy detectors or other devices. The unit can be powered either from the NCE Cab Bus (Like the NCE…

Show full description

This unit, based on an Arduino module, provides the same capabilities as an NCE Auxiliary Input Unit. Fourteen inputs are available to report the position of turnouts or for connection to block occupancy detectors or other devices. The unit can be powered either from the NCE Cab Bus (Like the NCE…

Show full description

Embeddable link to order this shared Project

Layout-Input-Monitor

2 layer board of 2.90 x 1.25 inches (73.7 x 31.8 mm)
Uploaded: May 12th 2022
Shared: May 13th 2022
Total Price: $18.10

This unit, based on an Arduino module, provides the same capabilities as an NCE Auxiliary Input Unit. Fourteen inputs are available to report the position of turnouts or for connection to block occupancy detectors or other devices

This unit, based on an Arduino module, provides the same capabilities as an NCE Auxiliary Input Unit. Fourteen inputs are available to report the position of turnouts or for connection to block occupancy detectors or other devices

Embeddable link to order this shared Project

RJ12-RJ45-Link

2 layer board of 1.13 x 0.65 inches (28.6 x 16.6 mm)
Uploaded: March 5th 2021
Shared: January 9th 2022
Total Price: $3.65

Used to connect the 6-wire NCE Cab Bus to a standard CAT 5 cable

Used to connect the 6-wire NCE Cab Bus to a standard CAT 5 cable

Embeddable link to order this shared Project

RJ12-RJ45-Panel

2 layer board of 1.90 x 1.15 inches (48.3 x 29.3 mm)
Uploaded: March 5th 2021
Shared: January 9th 2022
Total Price: $10.95

Provides access for wired NCE Handheld Controllers using an RJ12 connector to an NCE Cab Bus implemented over CAT 5 cabling. There is provision for connection to an external 12 VDC supply if required.

Provides access for wired NCE Handheld Controllers using an RJ12 connector to an NCE Cab Bus implemented over CAT 5 cabling. There is provision for connection to an external 12 VDC supply if required.

Embeddable link to order this shared Project

QSDM - SetAddress

2 layer board of 1.40 x 0.65 inches (35.6 x 16.6 mm)
Uploaded: March 24th 2021
Shared: January 9th 2022
Total Price: $4.55

A plug-on keypad used to set the NCE Cab Bus address for the Monitor section of the Quad Servo Decoder Monitor unit

A plug-on keypad used to set the NCE Cab Bus address for the Monitor section of the Quad Servo Decoder Monitor unit

Embeddable link to order this shared Project