Shared Projects by jterryc

Shared Projects by jterryc

RJ12-RJ45-Link

Top
Bottom

2 layer board of 1.13 x 0.65 inches (28.6 x 16.6 mm)
Uploaded: March 05, 2021
Shared: January 09, 2022
Total Price: $3.65

Used to connect the 6-wire NCE Cab Bus to a standard CAT 5 cable

Used to connect the 6-wire NCE Cab Bus to a standard CAT 5 cable

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RJ12-RJ45-Panel

Top
Bottom

2 layer board of 1.90 x 1.15 inches (48.3 x 29.3 mm)
Uploaded: March 05, 2021
Shared: January 09, 2022
Total Price: $10.95

Provides access for wired NCE Handheld Controllers using an RJ12 connector to an NCE Cab Bus implemented over CAT 5 cabling. There is provision for connection to an external 12 VDC supply if required.

Provides access for wired NCE Handheld Controllers using an RJ12 connector to an NCE Cab Bus implemented over CAT 5 cabling. There is provision for connection to an external 12 VDC supply if required.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QSDM - SetAddress

Top
Bottom

2 layer board of 1.40 x 0.65 inches (35.6 x 16.6 mm)
Uploaded: March 24, 2021
Shared: January 09, 2022
Total Price: $4.55

A plug-on keypad used to set the NCE Cab Bus address for the Monitor section of the Quad Servo Decoder Monitor unit

A plug-on keypad used to set the NCE Cab Bus address for the Monitor section of the Quad Servo Decoder Monitor unit

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QSDM-StatusView

Top
Bottom

2 layer board of 1.05 x 0.50 inches (26.7 x 12.7 mm)
Uploaded: July 14, 2021
Shared: January 09, 2022
Total Price: $2.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Quad-Servo_Decoder+Monitor_2-1

Top
Bottom

2 layer board of 2.90 x 2.05 inches (73.7 x 52.2 mm)
Uploaded: May 25, 2021
Shared: January 09, 2022
Total Price: $29.75

Combines a DCC Accessory Decoder, which can drive four standard servos, with a Monitor Unit with the same capabilities as an NCE Auxiliary Input Unit. Four of the Monitor Unit inputs can be used to report the position of turnouts driven by the servos, leaving 10 inputs spare for connection to blo…

Show full description

Combines a DCC Accessory Decoder, which can drive four standard servos, with a Monitor Unit with the same capabilities as an NCE Auxiliary Input Unit. Four of the Monitor Unit inputs can be used to report the position of turnouts driven by the servos, leaving 10 inputs spare for connection to blo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy