Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
4 layer board of 0.99 x 1.20 inches (25.2 x 30.4 mm)
Uploaded:
January 12th 2018
Shared:
January 12th 2018
Total Price:
$11.80
All smd parts are 0402, unless noted otherwise. The 3.5mm audio connector will be hard to find. There are some on eBay when this description was written. I…
All smd parts are 0402, unless noted otherwise. The 3.5mm audio connector will be hard to find. There are some on eBay when this description was written. I could not find an active part for one. If you know of one, let me know please. Be smart about cap voltage ratings. Just stick to 50v for .1u caps. For everything else stick to 10v caps.
Words of warning, this is a tough project to build as most components are 0402. You will also have to program the flash memory off of the board; as there are no JTAG or SPI points.
Here is GC-Video 2.4 Firmware: https://mega.nz/#!Pp02EC6S!D28bK7B8itsLhaYvJ7FCVOisHPrEX-WldAKEodoKGjg
I’ve yet to compile 2.4a for this project.
This project would not be possible without unseen’s GC-Video work. GC-Video can be found at his github. https://github.com/ikorb/gcvideo
The scart cable is not easy to build as everything fits very tight. The output on the Hirose connector is as follows:
Pin #
Output
1
Coaxial Audio
2
Mode (GND this pin to force YPbPr)
3
VSync
4
HSync
5
CSync
6
+5
7
GND
8
RED
9
GREEN
10
BLUE
All smd parts are 0402, unless noted otherwise. The 3.5mm audio connector will be hard to find. There are some on eBay when this description was written. I…
All smd parts are 0402, unless noted otherwise. The 3.5mm audio connector will be hard to find. There are some on eBay when this description was written. I could not find an active part for one. If you know of one, let me know please. Be smart about cap voltage ratings. Just stick to 50v for .1u caps. For everything else stick to 10v caps.
Words of warning, this is a tough project to build as most components are 0402. You will also have to program the flash memory off of the board; as there are no JTAG or SPI points.
Here is GC-Video 2.4 Firmware: https://mega.nz/#!Pp02EC6S!D28bK7B8itsLhaYvJ7FCVOisHPrEX-WldAKEodoKGjg
I’ve yet to compile 2.4a for this project.
This project would not be possible without unseen’s GC-Video work. GC-Video can be found at his github. https://github.com/ikorb/gcvideo
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.