Shared Projects by citrus3000psi

Shared Projects by citrus3000psi

GCDual 5.3

Top
Bottom

2 layer board of 1.78 x 1.40 inches (45.2 x 35.6 mm)
Uploaded: March 30th 2018
Shared: March 30th 2018
Total Price: $12.45

JP1 - Short for onboard flashing.

JP2 Open - Non Attenuated CSYNC

JP2 Closed - 75Ohm Attenuated CSYNC

Reference Value Notes
C1, C2, C4, C5, C7, C9, C10, C12, C15, C16, C17, C18, C20 .1u 0603 50V
C3, C8 10u 0603 10V
C6 4.7u 060…

Show full description

JP1 - Short for onboard flashing.

JP2 Open - Non Attenuated CSYNC

JP2 Closed - 75Ohm Attenuated CSYNC

Reference Value Notes
C1, C2, C4, C5, C7, C9, C10, C12, C15, C16, C17, C18, C20 .1u 0603 50V
C3, C8 10u 0603 10V
C6 4.7u 060…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Scart Head Female Breakout

Top
Bottom

2 layer board of 1.52 x 0.92 inches (38.7 x 23.3 mm)
Uploaded: March 28th 2018
Shared: March 28th 2018
Total Price: $6.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GCDual YPbPr Multiout QSB

Top
Bottom

2 layer board of 0.76 x 0.64 inches (19.2 x 16.2 mm)
Uploaded: February 19th 2018
Shared: March 6th 2018
Total Price: $2.40

This is setup to use HDRetrovisions SNES Multiout connectors. Some small filing might be required to fit. There are 3 small ground pads below some of the pins, this is for the MODE input on the GCDual. if you did NOT setup MODE input on the GCDual then make sure they do not make contact.

St…

Show full description

This is setup to use HDRetrovisions SNES Multiout connectors. Some small filing might be required to fit. There are 3 small ground pads below some of the pins, this is for the MODE input on the GCDual. if you did NOT setup MODE input on the GCDual then make sure they do not make contact.

St…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ColecoRGB PAL

Top
Bottom

2 layer board of 2.19 x 0.71 inches (55.6 x 18.0 mm)
Uploaded: December 28th 2017
Shared: March 5th 2018
Total Price: $7.70

Untested, use at own risk.

All components are 0603, unless stated differently.

C1, C2, C3, C6, C7, C10, C11 = .1u

C4, C5, C8, C9 = 47u - 0805/10v | 478-8652-1-ND

C12 = .01u

R1, R2, R3 = 75

R4 = 82

R5 = 680

R6, R9, R10, R12, R15, R16, R19, R21, R22, R23, R24, R28 = 1K

R7…

Show full description

Untested, use at own risk.

All components are 0603, unless stated differently.

C1, C2, C3, C6, C7, C10, C11 = .1u

C4, C5, C8, C9 = 47u - 0805/10v | 478-8652-1-ND

C12 = .01u

R1, R2, R3 = 75

R4 = 82

R5 = 680

R6, R9, R10, R12, R15, R16, R19, R21, R22, R23, R24, R28 = 1K

R7…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DCHDMI QSB1.2

Top
Bottom

2 layer board of 2.97 x 1.06 inches (75.5 x 27.0 mm)
Uploaded: March 1st 2018
Shared: March 1st 2018
Total Price: $15.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC