Shared projects

Hirose ST 10 PIN PCB

2 layer board of 0.28 x 0.31 inches (7.0 x 7.8 mm).
Shared on January 8th, 2018 22:20


Hirose ST 10 PIN PCB

2 layer board of 0.28 x 0.31 inches (7.0 x 7.8 mm).
Shared on January 8th, 2018 22:20



Scart Head w/ RGB Termination

2 layer board of 1.52 x 0.92 inches (38.7 x 23.3 mm).
Shared on January 5th, 2018 15:25


Scart Head w/ RGB Termination

2 layer board of 1.52 x 0.92 inches (38.7 x 23.3 mm).
Shared on January 5th, 2018 15:25



RGB Scart Head w/ Screw Terminals

2 layer board of 1.52 x 1.01 inches (38.7 x 25.8 mm).
Shared on January 4th, 2018 15:59

Designed to use DigiKey # 277-1280-ND Terminal.


RGB Scart Head w/ Screw Terminals

2 layer board of 1.52 x 1.01 inches (38.7 x 25.8 mm).
Shared on January 4th, 2018 15:59

Designed to use DigiKey # 277-1280-ND Terminal.



3DO USB QSB

2 layer board of 2.20 x 1.48 inches (56.0 x 37.6 mm).
Shared on December 6th, 2017 19:02

This is designed to be used with Mnemo’s 3DO USB loader with an FZ-10

Parts required:

WM17463-ND

609-5104-ND

609-1747-ND

**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.


3DO USB QSB

2 layer board of 2.20 x 1.48 inches (56.0 x 37.6 mm).
Shared on December 6th, 2017 19:02

This is designed to be used with Mnemo’s 3DO USB loader with an FZ-10

Parts required:

WM17463-ND

609-5104-ND

609-1747-ND

**One connector has 2 extra pins as it carries gnd/+5 to the device. Make sure to install the cable ends in the correct direction.



Scart Head PCB Panel

2 layer board of 3.66 x 3.67 inches (92.9 x 93.2 mm).
Shared on November 28th, 2017 19:30

Not Tested


Scart Head PCB Panel

2 layer board of 3.66 x 3.67 inches (92.9 x 93.2 mm).
Shared on November 28th, 2017 19:30

Not Tested