Yaesu-857-897-BT-Cat-Heaset
2 layer board of 1.48 x 1.51 inches (37.5 x 38.4 mm)
Uploaded:
April 20th 2020
Shared:
April 20th 2020
Total Price:
$11.15
Headset adapter for Yaesu radios that will also provide a BT CAT interface on FT-857 & FT-897 radios. All connectors and top side components are used for the audio interface. Components on the bottom are only used for the BT interface.
Headset adapter for Yaesu radios that will also provide a BT CAT interface on FT-857 & FT-897 radios. All connectors and top side components are used for the audio interface. Components on the bottom are only used for the BT interface.
X10 Control Board rev3
2 layer board of 3.49 x 1.25 inches (88.6 x 31.8 mm)
Uploaded:
October 6th 2019
Shared:
October 6th 2019
Total Price:
$21.80
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
X10 Control Board rev2
2 layer board of 3.69 x 1.35 inches (93.7 x 34.3 mm)
Uploaded:
September 21st 2019
Shared:
September 23rd 2019
Total Price:
$24.85
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
X10 Control module
2 layer board of 3.89 x 1.35 inches (98.8 x 34.3 mm)
Uploaded:
September 21st 2019
Shared:
September 21st 2019
Total Price:
$26.20
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
Board sends an on/off command based on a switched pin turning on or off. The 3 pin headers are for the power interface - 1 (closest to edge) is the hot, 2 is the switched hot, and 3 is the neutral. This is based on the Microchip AN236 App Note, but using an ATMEGA328P for the main chip due to eas…
Show full description
