MMA7660 3-Axis Accelerometer Breakout v1.1
2 layer board of 0.55 x 0.47 inches (14.0 x 11.8 mm)
Uploaded:
March 08, 2017
Shared:
March 08, 2017
Total Price:
$1.25
MMA7660 3-axis Accelerometer breadboard-compatible breakout board.
The I2C lines already have 1K pullup resistors so there's no need for any external parts.
The Github repo has the design and parts l…
Show full description
MMA7660 3-axis Accelerometer breadboard-compatible breakout board.
The I2C lines already have 1K pullup resistors so there's no need for any external parts.
The Github repo has the design and parts l…
Show full description
SD Connector 2041021-4 Breakout v1.0
2 layer board of 1.76 x 1.16 inches (44.6 x 29.4 mm)
Uploaded:
January 05, 2017
Shared:
March 07, 2017
Total Price:
$10.15
Breadboard-compatible breakout for a full size SD card (or microSD card adapter).
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
The [Basic Breakouts Github repo](https://github.com/wickerb…
Show full description
Breadboard-compatible breakout for a full size SD card (or microSD card adapter).
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
The [Basic Breakouts Github repo](https://github.com/wickerb…
Show full description
Simple AVR Programmer v1.1
2 layer board of 1.61 x 0.66 inches (40.8 x 16.7 mm)
Uploaded:
February 10, 2017
Shared:
March 07, 2017
Total Price:
$5.25
Simple Atmega328-based AVR programmer with ISP and FTDI breakout. I use this with Nick Gammon's Arduino Progarmmer sketch to put the bootloader on other AVR chips.
The board has surface mount parts which may be easier to solder with paste or tinned pads a…
Show full description
Simple Atmega328-based AVR programmer with ISP and FTDI breakout. I use this with Nick Gammon's Arduino Progarmmer sketch to put the bootloader on other AVR chips.
The board has surface mount parts which may be easier to solder with paste or tinned pads a…
Show full description
Neopixel WS2812B Breakout Board v1.1
2 layer board of 0.31 x 0.81 inches (7.8 x 20.5 mm)
Uploaded:
February 07, 2017
Shared:
February 07, 2017
Total Price:
$1.20
Breadboard-compatible breakout board for a WS2812B or 5050-compatible RGB "Neopixel" LED.
The Github repo has the design and parts list.
This project is released under the [Open Hardware License …
Show full description
Breadboard-compatible breakout board for a WS2812B or 5050-compatible RGB "Neopixel" LED.
The Github repo has the design and parts list.
This project is released under the [Open Hardware License …
Show full description
MicroSD Connector 0475710001 Breakout v1.0
2 layer board of 0.99 x 0.65 inches (25.1 x 16.4 mm)
Uploaded:
January 05, 2017
Shared:
February 06, 2017
Total Price:
$3.15
Breadboard-compatible breakout for a micro SD card using a very small push-pull connector.
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
The [Basic Breakouts Github repo](https://github.co…
Show full description
Breadboard-compatible breakout for a micro SD card using a very small push-pull connector.
The board has surface mount parts which may be easier to solder with paste or tinned pads and a hot plate, toaster oven, or hot air rework station.
The [Basic Breakouts Github repo](https://github.co…
Show full description
