Shared Projects by BrK

Shared Projects by BrK

DHT11 for ESP-07

Top
Bottom

2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded: May 6th 2016
Shared: June 1st 2016
Total Price: $7.70

Useless power supply and dht11 board for my esp-07 main board.

Because the vcc pin of the sensor is connected to 5V, the data pin will also be 5V logic. This means it will probably damage the esp8266. Order on your own risk. This board is useless anyway.

Useless power supply and dht11 board for my esp-07 main board.

Because the vcc pin of the sensor is connected to 5V, the data pin will also be 5V logic. This means it will probably damage the esp8266. Order on your own risk. This board is useless anyway.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

One relay and Power Supply

Top
Bottom

2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded: May 6th 2016
Shared: May 6th 2016
Total Price: $7.70

Power supply and one relay for my esp-07 board.

With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…

Show full description

Power supply and one relay for my esp-07 board.

With a PNP transistor, as it was designed, this board dose not work with the ESP-07 module. The 3.3V logic is to low for the transistor to cut OFF the relay. The relay is always ON. Another revision with a NPN transitor is on the way. If you have…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP-07 Breakout Board

Top
Bottom

2 layer board of 1.10 x 1.40 inches (27.9 x 35.6 mm)
Uploaded: May 5th 2016
Shared: May 5th 2016
Total Price: $7.70

Simple main board for an ESP-07

It is working just fine. [email protected] for any questions.

Simple main board for an ESP-07

It is working just fine. [email protected] for any questions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Test PCB

Top
Bottom

2 layer board of 2.21 x 2.96 inches (56.1 x 75.1 mm)
Uploaded: March 28th 2016
Shared: March 28th 2016
Total Price: $32.65

Test PCB for StrapuBOX SP-2029

Test PCB for StrapuBOX SP-2029

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ATAPI Duino.brd

Top
Bottom

2 layer board of 2.95 x 2.80 inches (74.9 x 71.2 mm)
Uploaded: February 6th 2016
Shared: February 6th 2016
Total Price: $41.30

Arduino cd-player controller. It is based on the "ATAPIDUINO" project which is not mine. I just made a pcb for it. Everything works just fine on breadboard and perfoboard, this PCB is not tested yet, order on your own risk! for any details contact me on [email protected]

Atapiduino pr…

Show full description

Arduino cd-player controller. It is based on the "ATAPIDUINO" project which is not mine. I just made a pcb for it. Everything works just fine on breadboard and perfoboard, this PCB is not tested yet, order on your own risk! for any details contact me on [email protected]

Atapiduino pr…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC