microSIM push - push socket $4.25 for three
2 layer board of 0.79 x 1.09 inches (20.0 x 27.7 mm)
Uploaded:
September 10, 2015
Shared:
September 16, 2015
Total Price:
$4.25
Solder test for micro simcard socket from würth elektronik part number: 693021010811 http://katalog.we-online.de/en/em/693_021_010_811
Do not try to use this simcard socket in your project. It is very hard to solder without stencils and reflow oven. I managed to solder it with a hot air statio…
Show full description
Solder test for micro simcard socket from würth elektronik part number: 693021010811 http://katalog.we-online.de/en/em/693_021_010_811
Do not try to use this simcard socket in your project. It is very hard to solder without stencils and reflow oven. I managed to solder it with a hot air statio…
Show full description
SIM800H/L breakout board.
2 layer board of 1.20 x 1.28 inches (30.5 x 32.5 mm)
Uploaded:
September 16, 2015
Shared:
September 16, 2015
Total Price:
$7.65
There are two USB port, one if for module debug (DEBUG) and the other one is used to power the module (PWR). DO NOT ATTEMPT TO CONNECT 5V TO THE PWR!! It should be between 3.4V and 4.4V (I used a USB socket because it suits my needs)
There are two USB port, one if for module debug (DEBUG) and the other one is used to power the module (PWR). DO NOT ATTEMPT TO CONNECT 5V TO THE PWR!! It should be between 3.4V and 4.4V (I used a USB socket because it suits my needs)
Voltage regulator
2 layer board of 0.89 x 1.42 inches (22.6 x 35.9 mm)
Uploaded:
July 06, 2015
Shared:
July 24, 2015
Total Price:
$6.25
To be used with a SimCOM gsm module. input 5V 2A output 4.2V 2A Tested, works with power form an USB hub.
To be used with a SimCOM gsm module. input 5V 2A output 4.2V 2A Tested, works with power form an USB hub.
