Shared Projects by Barbouri

Shared Projects by Barbouri

LNA60 3V3 Case 1090MHz Filter Ver-3.2

Top
Bottom

4 layer board of 3.15 x 0.89 inches (80.0 x 22.7 mm)
Uploaded: April 03, 2017
Shared: April 04, 2017
Total Price: $28.10

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 3.2 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt bias power. This board uses mostly the same components as the Ver 2.3 board linked below, but places the bandpass filter before th…

Show full description

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 3.2 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt bias power. This board uses mostly the same components as the Ver 2.3 board linked below, but places the bandpass filter before th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SDR ADS-B LNA and 1090MHz Filter Ver-2.3

Top
Bottom

4 layer board of 3.15 x 0.89 inches (80.0 x 22.7 mm)
Uploaded: February 27, 2017
Shared: March 13, 2017
Total Price: $28.10

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 2.3 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt power. <https://www.barbouri.com/2017/03/12/low-noise-amplifier-for-sdr-radio-ads-b-ver-2-3-with-1090mhz-ceramic-filter/> ![Volta…

Show full description

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 2.3 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt power. <https://www.barbouri.com/2017/03/12/low-noise-amplifier-for-sdr-radio-ads-b-ver-2-3-with-1090mhz-ceramic-filter/> ![Volta…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Vref-4 Version 2.0 ext Pwr

Top
Bottom

2 layer board of 1.77 x 1.08 inches (44.9 x 27.4 mm)
Uploaded: October 15, 2016
Shared: December 25, 2016
Total Price: $9.50

Quad Voltage Reference V 2.0 external 12Vdc power <https://www.barbouri.com/2016/12/25/voltage-reference-quad-project-2-part-1/> Voltage Reference Quad Project

Quad Voltage Reference V 2.0 external 12Vdc power <https://www.barbouri.com/2016/12/25/voltage-reference-quad-project-2-part-1/> Voltage Reference Quad Project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4 Pin Shorting Board V1

Top
Bottom

2 layer board of 1.25 x 1.25 inches (31.8 x 31.8 mm)
Uploaded: November 03, 2016
Shared: November 24, 2016
Total Price: $7.80

Four Pin Shorting for Keithley 2015 / 20XX <https://www.barbouri.com/2016/12/29/4-wire-dmm-shorting-plug/> Voltage Reference Quad Project

Four Pin Shorting for Keithley 2015 / 20XX <https://www.barbouri.com/2016/12/29/4-wire-dmm-shorting-plug/> Voltage Reference Quad Project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Milliohm Meter Version 1.5

Top
Bottom

2 layer board of 2.49 x 1.54 inches (63.2 x 39.1 mm)
Uploaded: September 26, 2016
Shared: September 26, 2016
Total Price: $19.15

Milliohm Meter Version 1.5 This is a DIY milliohm meter that was originally designed by Scullcom Hobby Electronics and presented on Youtube. Updated board with display power connector, PTC fuse, and current set resistors <http://www.barbouri.com/2016/10/09/milliohm-meter-version-1-5/> ![Milliohm …

Show full description

Milliohm Meter Version 1.5 This is a DIY milliohm meter that was originally designed by Scullcom Hobby Electronics and presented on Youtube. Updated board with display power connector, PTC fuse, and current set resistors <http://www.barbouri.com/2016/10/09/milliohm-meter-version-1-5/> ![Milliohm …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy