HP 11456A Read Out Test Card Rev. D
2 layer board of 3.27 x 2.28 inches (83.1 x 58.0 mm)
Uploaded:
February 20, 2022
Shared:
February 20, 2022
Total Price:
$37.30
HP Display Module Read Out Test Card Rev. D 11456-66501 For Hewlett Packard 34740A and 34750A display modules. <https://www.barbouri.com/2022/02/19/remake-of-the-hewlett-packard-11456a-read-out-test-card/> 
Show full description
HP Display Module Read Out Test Card Rev. D 11456-66501 For Hewlett Packard 34740A and 34750A display modules. <https://www.barbouri.com/2022/02/19/remake-of-the-hewlett-packard-11456a-read-out-test-card/> 
2 layer board of 2.53 x 0.98 inches (64.3 x 24.9 mm)
Uploaded:
January 17, 2022
Shared:
February 04, 2022
Total Price:
$12.35
Slim-OLED NHD-0216CW Display I2C interface with I/O and EEPROM. 5 volt input with regulated 3.3 volts for display and onboard IC's. Rev. 1.0
<https://www.barbouri.com/2022/02/04/slim-oled-display-interface-board/> 
Show full description
Slim-OLED NHD-0216CW Display I2C interface with I/O and EEPROM. 5 volt input with regulated 3.3 volts for display and onboard IC's. Rev. 1.0
<https://www.barbouri.com/2022/02/04/slim-oled-display-interface-board/> 
2 layer board of 1.15 x 1.16 inches (29.2 x 29.5 mm)
Uploaded:
April 18, 2019
Shared:
May 27, 2021
Total Price:
$6.65
Low distortion Wien Bridge Oscillator - High Performance Version. Selected values for 1,000 Hz frequency output at 26 volts peak to peak. C1, C2 are precision film capacitors for low drift and distortion. IC1 is an OPA1612 ultra-low noise and distortion audio op-amp. VR4 is an external 10K potent…
Show full description
Low distortion Wien Bridge Oscillator - High Performance Version. Selected values for 1,000 Hz frequency output at 26 volts peak to peak. C1, C2 are precision film capacitors for low drift and distortion. IC1 is an OPA1612 ultra-low noise and distortion audio op-amp. VR4 is an external 10K potent…
Show full description
CreeXLED0111
2 layer board of 1.18 x 1.18 inches (30.0 x 30.0 mm)
Uploaded:
March 07, 2021
Shared:
April 20, 2021
Total Price:
$6.95
Stanton B15 balance light source w/lens using Cree MX6 XLamp LED and lens Revision 1.11
<https://www.barbouri.com/2021/04/20/cree-mx6-xlamp-build/> ![Light source w/lens Rev. 1.11](https://www.barbouri.com/wp-content/uploads/2021/03/CreeMX6topPad10.jpg"Light%20source%20w/lens%20Rev.%201.11")
Cr…
Show full description
Stanton B15 balance light source w/lens using Cree MX6 XLamp LED and lens Revision 1.11
<https://www.barbouri.com/2021/04/20/cree-mx6-xlamp-build/>
Cr…
Show full description
PD ADC/LED Driver Rev 2.0
2 layer board of 2.78 x 1.77 inches (70.7 x 45.0 mm)
Uploaded:
December 17, 2020
Shared:
January 05, 2021
Total Price:
$24.65
ADC/LED Driver for Power Designs Inc. D series meter replacement. Based on original board design from 6050C meter by Greg Christenson and 6050D edge card design by Ron Metcalf. Uses the Maxim Integrated MAX1447 ADC/LED driver IC. Added additional filtering on input, corrected digital selection po…
Show full description
ADC/LED Driver for Power Designs Inc. D series meter replacement. Based on original board design from 6050C meter by Greg Christenson and 6050D edge card design by Ron Metcalf. Uses the Maxim Integrated MAX1447 ADC/LED driver IC. Added additional filtering on input, corrected digital selection po…
Show full description
