LNA60 3V3 Case 1090MHz Filter Ver-3.2

author: Barbouri
Top
Bottom

4 layer board of 3.15 x 0.89 inches (80.0 x 22.7 mm)
Uploaded: April 03, 2017
Shared: April 04, 2017
Total Price: $28.10

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 3.2 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt bias power. This board uses mostly the same components as the Ver 2.3 board linked below, but places the bandpass filter before the LNA and also requires 5VDC external bias power thru the output SMA connector. NOT-TESTED https://www.barbouri.com/2017/03/12/low-noise-amplifier-for-sdr-radio-ads-b-ver-2-3-with-1090mhz-ceramic-filter/

Low Noise Amplifier for SDR Radio ADS-B reception Ver. 3.2 with 1090MHz ceramic-coaxial-resonator based bandpass filter, for aluminum case 25x25x80mm mount and 5 volt bias power. This board uses mostly the same components as the Ver 2.3 board linked below, but places the bandpass filter before the LNA and also requires 5VDC external bias power thru the output SMA connector. NOT-TESTED https://www.barbouri.com/2017/03/12/low-noise-amplifier-for-sdr-radio-ads-b-ver-2-3-with-1090mhz-ceramic-filter/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy