Shared Projects by ABrugsch

Shared Projects by ABrugsch

Ender 3 BLTouch GPIO27 minimal breakout (UNTESTED!!!)

Top
Bottom

2 layer board of 0.67 x 0.65 inches (17.0 x 16.5 mm)
Uploaded: October 25th 2018
Shared: October 25th 2018
Total Price: $2.15

UNTESTED! UNTESTED! PROCEED WITH CAUTION!

Use a long pin 2x5 2.54" stackable female header block and a 1x3 strip of header pins (or right angle pins) to breakout Pin 27 for the Ender 3 3D printer to use the BLTouch auto leveler

UNTESTED! UNTESTED! PROCEED WITH CAUTION!

Use a long pin 2x5 2.54" stackable female header block and a 1x3 strip of header pins (or right angle pins) to breakout Pin 27 for the Ender 3 3D printer to use the BLTouch auto leveler

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ender 3 BLTouch adapter

Top
Bottom

2 layer board of 0.93 x 0.95 inches (23.6 x 24.2 mm)
Uploaded: October 24th 2018
Shared: October 24th 2018
Total Price: $4.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Gaboze Pocaio Audio Fix

Top
Bottom

2 layer board of 0.48 x 0.43 inches (12.1 x 11.0 mm)
Uploaded: September 28th 2018
Shared: October 17th 2018
Total Price: $1.00

If you order a set of these, please consider buying me a coffee Fix the audio on Gaboze Pocaio. Gaboze Pocaio uses unfiltered PWM into the amplifier stage and as a result most audio sounds pretty bad. the simplest fix for this is to add the filter circuit before t…

Show full description

If you order a set of these, please consider buying me a coffee Fix the audio on Gaboze Pocaio. Gaboze Pocaio uses unfiltered PWM into the amplifier stage and as a result most audio sounds pretty bad. the simplest fix for this is to add the filter circuit before t…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIP-VGA-v1.0.brd

Top
Bottom

4 layer board of 1.76 x 3.12 inches (44.7 x 79.2 mm)
Uploaded: January 10th 2017
Shared: June 5th 2018
Total Price: $54.90

NTC VGA DIP board for C.H.I.P

source: https://github.com/NextThingCo/DIP-VGA-PCB

NTC VGA DIP board for C.H.I.P

source: https://github.com/NextThingCo/DIP-VGA-PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MintyPi Screen adapter board

Top
Bottom

2 layer board of 0.83 x 0.67 inches (21.1 x 17.0 mm)
Uploaded: July 14th 2017
Shared: July 26th 2017
Total Price: $2.75

breaks out the 8-pin FPC connector to 0.1" headers

breaks out the 8-pin FPC connector to 0.1" headers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC