Roomba Virtual Wall v2 - rev A

By Petezah

2 layer board of 1.54 x 2.00 inches (39.0 x 50.8 mm).
Shared on May 26th, 2016 13:57

A virtual wall for the iRobot Roomba using the ATTiny85.

See firmware, current BOMs, and instructions, as they are updated, at https://github.com/Petezah/roomba_wall_v2.


Roomba Virtual Wall v2 - rev A

By Petezah

2 layer board of 1.54 x 2.00 inches (39.0 x 50.8 mm).
Shared on May 26th, 2016 13:57

A virtual wall for the iRobot Roomba using the ATTiny85.

See firmware, current BOMs, and instructions, as they are updated, at https://github.com/Petezah/roomba_wall_v2.