HP Common Slot Breakout Board
author: tridesraty
2 layer board of 3.25 x 1.18 inches (82.6 x 30.1 mm)
Uploaded:
March 20, 2020
Shared:
April 05, 2020
Total Price:
$19.25
HP breakout board for the Common Slot power supplies. Similar to Jboards design. R1 is a 21k or 22k 1/8w
Card edge connector (that plugs into the HP Power supply is a TE 1761469-1 https://www.digikey.com/product-detail/en/te-connectivity-amp-connectors/1761469-1/1761469-1-ND/2688514
Power screw terminals are 6.35mm 2-connector screw terminals - make sure they are 32a rated. I use Phoenix contact 1714955 https://www.digikey.com/product-detail/en/phoenix-contact/1714955/277-1269-ND/260637
All of the connectors mount on one side, as indicated from the PCB text. MAX power is 900w with 1oz copper. You can run it on a HP 1200w power supply fed by 120v. DO NOT go over this. at 900w, the PCB will run warm. You can run 2oz and have less heating.
HP breakout board for the Common Slot power supplies. Similar to Jboards design. R1 is a 21k or 22k 1/8w
Card edge connector (that plugs into the HP Power supply is a TE 1761469-1 https://www.digikey.com/product-detail/en/te-connectivity-amp-connectors/1761469-1/1761469-1-ND/2688514
Power screw terminals are 6.35mm 2-connector screw terminals - make sure they are 32a rated. I use Phoenix contact 1714955 https://www.digikey.com/product-detail/en/phoenix-contact/1714955/277-1269-ND/260637
All of the connectors mount on one side, as indicated from the PCB text. MAX power is 900w with 1oz copper. You can run it on a HP 1200w power supply fed by 120v. DO NOT go over this. at 900w, the PCB will run warm. You can run 2oz and have less heating.
