BLF 17dd_PIC_v2.1

author: Cereal_Killer
Top
Bottom

2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded: October 09, 2014
Shared: October 09, 2014
Total Price: $2.20

Open source direct driver LED driver running a PIC 12F617 with FW by Tterev3. See post #1360 in this thread (http://budgetlightforum.com/node/33927)

  • D1 is SOT-323
  • C2 is 10uf 0805 X7R (found to be NOT NEEDED)
  • C1 is 2.2-10uf (almost anything will work) Stack zener over cap for multi-cell use
  • D1 = SOD-323 (pad is used for 0805 200ohm resistor if zener modded)
  • FET is D2PAK such as AOD510 or (the no longer available Vishay 70N02)

Open source direct driver LED driver running a PIC 12F617 with FW by Tterev3. See post #1360 in this thread (http://budgetlightforum.com/node/33927)

  • D1 is SOT-323
  • C2 is 10uf 0805 X7R (found to be NOT NEEDED)
  • C1 is 2.2-10uf (almost anything will work) Stack zener over cap for multi-cell use
  • D1 = SOD-323 (pad is used for 0805 200ohm resistor if zener modded)
  • FET is D2PAK such as AOD510 or (the no longer available Vishay 70N02)
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy