MTN-12DD
author: MTN
2 layer board of 0.48 x 0.48 inches (12.2 x 12.2 mm)
Uploaded:
March 18, 2015
Shared:
March 18, 2015
Total Price:
$1.15
Single-Sided LFPAK33 12mm FET Driver
A bigger version of its little brother, the MTN-10DD. This PCB can be sanded or ground down to 10mm if needed.
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
Single-Sided LFPAK33 12mm FET Driver
A bigger version of its little brother, the MTN-10DD. This PCB can be sanded or ground down to 10mm if needed.
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
