PowerDough Mini v1 - Mini Breadboard to PSU Connector
author: PhantomicLabs
2 layer board of 1.40 x 1.10 inches (35.6 x 28.0 mm)
Uploaded:
October 23, 2018
Shared:
October 23, 2018
Total Price:
$7.70
New from Phantomic Labs, PowerDough Mini v1 - Mini Breadboard to PSU Connector.
Tired of rigging various jumper wires from your PSU to your breadboards? This allows for a power feed from micro-usb, alligator clips, banana clips, terminal, or jumper wire. Connects to breadboard via two 3x2 2.54mm pitch SMD male header pins.
Warning: UNTESTED, traces rated for 24V at 2A Max. There is no protection in this circuit, only VIN and Ground, so make sure you use a battery or clean PSU to power this board. Polarity is indicated on the top side of the board. This is for the mini-style solderless breadboards with no power bus.
New from Phantomic Labs, PowerDough Mini v1 - Mini Breadboard to PSU Connector.
Tired of rigging various jumper wires from your PSU to your breadboards? This allows for a power feed from micro-usb, alligator clips, banana clips, terminal, or jumper wire. Connects to breadboard via two 3x2 2.54mm pitch SMD male header pins.
Warning: UNTESTED, traces rated for 24V at 2A Max. There is no protection in this circuit, only VIN and Ground, so make sure you use a battery or clean PSU to power this board. Polarity is indicated on the top side of the board. This is for the mini-style solderless breadboards with no power bus.
