eXaDrums Piezo ADC Board ver. 0.2.0
author: JeremyOden
2 layer board of 2.20 x 2.56 inches (55.9 x 65.0 mm)
Uploaded:
September 07, 2018
Shared:
September 30, 2018
Total Price:
$28.15
Project description
This board is compatible with the Raspberry Pi 3 (B and B+), and is intended to be used with a Roland TD4-KP drum kit in order to provide a fully functional drum module. It is important to note that, the input number 7 is connected to the wrong sensor of the crash cymbal, and should be replaced by input number 6. Another important thing is that there is no hi-hat controller (pedal) input connected.
Components list
- TLC2264
- MCP3008
- LMC7660
- 100k resistors
- 1M potentiometers
- 10µF capacitors
- 220nF capacitor
Resources
Associated Github repositories: eXaDrums-pcb, eXaDrums, libeXaDrums.
Project page on Hackaday: eXaDrums.
Project description
This board is compatible with the Raspberry Pi 3 (B and B+), and is intended to be used with a Roland TD4-KP drum kit in order to provide a fully functional drum module. It is important to note that, the input number 7 is connected to the wrong sensor of the crash cymbal, and should be replaced by input number 6. Another important thing is that there is no hi-hat controller (pedal) input connected.
Components list
- TLC2264
- MCP3008
- LMC7660
- 100k resistors
- 1M potentiometers
- 10µF capacitors
- 220nF capacitor
Resources
Associated Github repositories: eXaDrums-pcb, eXaDrums, libeXaDrums.
Project page on Hackaday: eXaDrums.
