Compter Place numberpad keyboard adapter for C64 and VIC 20
author: Wilykat
2 layer board of 2.89 x 1.00 inches (73.5 x 25.5 mm)
Uploaded:
March 04, 2022
Shared:
March 04, 2022
Total Price:
$14.50
If you have a Computer Place numeric keypad for Commodore C64 and Vic 20 but do not have the necessary adapter to connect the keypad to the C64/20’s keyboard connector and motherboard, this is what you need.
For CP Numeric Keypad model number NKP
The board design is nearly a 1:1 copy of the original with the added silkscreen and solder mask plus cool Commodore logo.
BOM: 14 pin IC socket, 300 mils, this goes on the top. 20 pin female connector, 0.1" spacing (often called Dupont), this goes on the bottom. 20 pin male connector, 0.1" spacing and 90 degree angle. Be sure to remove pin #2 (at KEY location on PCB) before soldering. This goes on the top.
If you have a Computer Place numeric keypad for Commodore C64 and Vic 20 but do not have the necessary adapter to connect the keypad to the C64/20’s keyboard connector and motherboard, this is what you need.
For CP Numeric Keypad model number NKP
The board design is nearly a 1:1 copy of the original with the added silkscreen and solder mask plus cool Commodore logo.
BOM: 14 pin IC socket, 300 mils, this goes on the top. 20 pin female connector, 0.1" spacing (often called Dupont), this goes on the bottom. 20 pin male connector, 0.1" spacing and 90 degree angle. Be sure to remove pin #2 (at KEY location on PCB) before soldering. This goes on the top.
