PowerSwitch.kicad_pcb
author: AlbertoGH
2 layer board of 0.59 x 0.30 inches (15.0 x 7.5 mm)
Uploaded:
July 01, 2019
Shared:
July 01, 2019
Total Price:
$0.85
This board lets you switch power on and off using a pin from the flight controller as a high side switch. Thus, it can be used even with analog devices that must be at exactly the same ground potential (e.g. camera, VTX). It uses 4 resistors and 2 MOSFETs. Check the silkscreen on the back for the BOM and maximum ratings.
This board lets you switch power on and off using a pin from the flight controller as a high side switch. Thus, it can be used even with analog devices that must be at exactly the same ground potential (e.g. camera, VTX). It uses 4 resistors and 2 MOSFETs. Check the silkscreen on the back for the BOM and maximum ratings.
