Swedish Vaper PotBelly BackPack v3
author: SwedishVaper
2 layer board of 0.53 x 0.53 inches (13.5 x 13.5 mm)
Uploaded:
October 31, 2016
Shared:
November 22, 2016
Total Price:
$1.40
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
NOTE: make sure resistor does not short against p-fet on PotBelly board.
Any previous projects that are now deleted are used at your own risk.)
Parts required:
1 x 1K ohm 0603 resistor 1 x PSMN1R5-30YLC n-fet (lfpak)
Designed as an add-on to the Swedish Vaper PotBelly v1, v2 & v3, but can be used as a standalone fet-board.
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
NOTE: make sure resistor does not short against p-fet on PotBelly board.
Any previous projects that are now deleted are used at your own risk.)
Parts required:
1 x 1K ohm 0603 resistor 1 x PSMN1R5-30YLC n-fet (lfpak)
Designed as an add-on to the Swedish Vaper PotBelly v1, v2 & v3, but can be used as a standalone fet-board.
