8-SOIC/EP Breakout Board
author: Eric
2 layer board of 0.51 x 0.41 inches (12.9 x 10.3 mm)
Uploaded:
October 09, 2013
Shared:
January 15, 2014
Total Price:
$1.00
Cost: $1.00 for three.
Description:
Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.
Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provided, with thermal vias to bottom side copper pour and unmasked copper on bottom side to aid soldering.
The lower-middle through-hole pad is connected to the IC exposed pad; solder a wire in this hole and jumper to appropriate IC pin.
Pins numbered on top side for quick reference and silk screen area on reverse to write part number, pin annotations, etc.
This is intended as a breadboard testing aid only. It will not provide adequate heatsinking to reach datasheet thermal limits, so don’t turn the wick up all the way!
Cost: $1.00 for three.
Description:
Breakout board for 8-SOIC/EP package. Converts 8-SOIC/EP to breadboard-friendly 0.1-inch pitch by 0.4-inch width through-hole format.
Wide traces on all pins, suitable for use with power packages. For ICs with exposed pad, it is provided, with thermal vias to bottom side copper pour and unmasked copper on bottom side to aid soldering.
The lower-middle through-hole pad is connected to the IC exposed pad; solder a wire in this hole and jumper to appropriate IC pin.
Pins numbered on top side for quick reference and silk screen area on reverse to write part number, pin annotations, etc.
This is intended as a breadboard testing aid only. It will not provide adequate heatsinking to reach datasheet thermal limits, so don’t turn the wick up all the way!
