USB Line Voltage Inducer
author: Zarradeth
2 layer board of 1.90 x 1.36 inches (48.3 x 34.5 mm)
Uploaded:
January 01, 2017
Shared:
January 16, 2017
Total Price:
$12.90
(v1.8)
A board for building a line voltage inducer (as part of a phone cable) powered by USB. Meant for use with a Dreamcast and DreamPi. The board includes a DC-DC boost converter which boosts the 5v supplied via the USB to the required voltage- both 9v and 18v are supported, you just have to populate the board for the appropriate voltage. Phone jacks are used instead of splicing the cable to make the inducer as easy to use as possible.
- U1 is a TI MC33063AP
- D0 should be a Schottky Diode with a high enough voltage rating
- J1 and J2 were designed for Stewart Connector’s SS-6466S-A-PG1
- J3 was designed for Amphenol FCI’s 73725-0110BLF
(v1.8)
A board for building a line voltage inducer (as part of a phone cable) powered by USB. Meant for use with a Dreamcast and DreamPi. The board includes a DC-DC boost converter which boosts the 5v supplied via the USB to the required voltage- both 9v and 18v are supported, you just have to populate the board for the appropriate voltage. Phone jacks are used instead of splicing the cable to make the inducer as easy to use as possible.
- U1 is a TI MC33063AP
- D0 should be a Schottky Diode with a high enough voltage rating
- J1 and J2 were designed for Stewart Connector’s SS-6466S-A-PG1
- J3 was designed for Amphenol FCI’s 73725-0110BLF
