DB25 IDC26/Header Breakout
author: Mark-Pickhard
2 layer board of 1.42 x 0.58 inches (36.0 x 14.8 mm)
Uploaded:
May 28, 2018
Shared:
December 23, 2018
Total Price:
$4.10
Details are at Hackaday at DB25 IDC26/Header Breakout Board.
This connects up to one each of D-Sub DB25M, DB25F, and IDC26 13x2 0.1" 2.54mm header/ribbon cable. All three connectors are wired together in the standard fashion (DB25-1=IDC26-1, 2=3, 3=5, …, DB25-13=IDC26-25, DB25-14=IDC26-2, 15=4, 16=6, …, 25=24). This can also be used with DB15 and DB9 connectors. The edge of the board sits between the two rows of Dsub pins and is surface soldered. The Dsub DB connectors can be solder cup (preferred) or straight pin (which have to be bent inward toward the PCB for a friction fit before soldering). Solder the D-Sub(s) before soldering in a header.
Details are at Hackaday at DB25 IDC26/Header Breakout Board.
This connects up to one each of D-Sub DB25M, DB25F, and IDC26 13x2 0.1" 2.54mm header/ribbon cable. All three connectors are wired together in the standard fashion (DB25-1=IDC26-1, 2=3, 3=5, …, DB25-13=IDC26-25, DB25-14=IDC26-2, 15=4, 16=6, …, 25=24). This can also be used with DB15 and DB9 connectors. The edge of the board sits between the two rows of Dsub pins and is surface soldered. The Dsub DB connectors can be solder cup (preferred) or straight pin (which have to be bent inward toward the PCB for a friction fit before soldering). Solder the D-Sub(s) before soldering in a header.
