Arcade USB-GPIO-Control
author: n00b
2 layer board of 1.57 x 1.88 inches (39.9 x 47.8 mm)
Uploaded:
July 26, 2021
Shared:
July 26, 2021
Total Price:
$14.75
small pcb that allows to connect buttons with the 3v GPIO pins of a Raspberry Pi (e.g. to trigger some special functions) and a 5v USB Encoder (e.g. https://www.amazon.com/-/de/dp/B06XCP8R5F/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ZERO+DELAY+ENCODER&qid=1627218697&sr=8-4) at the same time
BOM:
- 2x diode 1N4005
- 2x relay G5V-2 5DC
- 2x 2pin screw terminal 3.5mm pitch
- 1x 10pin screw terminal 3.5mm pitch (or 5x 2pin screw terminals)
small pcb that allows to connect buttons with the 3v GPIO pins of a Raspberry Pi (e.g. to trigger some special functions) and a 5v USB Encoder (e.g. https://www.amazon.com/-/de/dp/B06XCP8R5F/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ZERO+DELAY+ENCODER&qid=1627218697&sr=8-4) at the same time
BOM:
- 2x diode 1N4005
- 2x relay G5V-2 5DC
- 2x 2pin screw terminal 3.5mm pitch
- 1x 10pin screw terminal 3.5mm pitch (or 5x 2pin screw terminals)
