Nintendo Famicom Composite Mod
author: AzuraBayta
2 layer board of 1.30 x 0.60 inches (33.0 x 15.2 mm)
Uploaded:
December 07, 2022
Shared:
December 07, 2022
Total Price:
$3.90
A simple video amplifier for composite video in a Famicom. Should also work fine in an NES Top Loader, but I haven’t tried it personally. Also includes a passthrough for audio, with a filter cap.
The solder points marked 20, 21, and 22 refer to pins on the PPU, and are ground, video, and 5 volts respectively. Audio can be taken from pin 46 on the cartridge connector.
A simple video amplifier for composite video in a Famicom. Should also work fine in an NES Top Loader, but I haven’t tried it personally. Also includes a passthrough for audio, with a filter cap.
The solder points marked 20, 21, and 22 refer to pins on the PPU, and are ground, video, and 5 volts respectively. Audio can be taken from pin 46 on the cartridge connector.
