ERLT Transponder FC 36mm Mount
author: ryanb
2 layer board of 0.60 x 1.43 inches (15.1 x 36.4 mm)
Uploaded:
April 27, 2016
Shared:
May 22, 2016
Total Price:
$4.25
ERLT Transponder FC 36mm Mount
ERLT LiPO Powered transponder w/ 5V regulator
This project has been race tested and is easy to solder. The transponder support 2s or 3s lipo input (7.4V or 11.1V nominal) or a 5V input. The onboard voltage regulator steps the voltage down to 5V.
Parts List: * Attiny85 ATTINY85-20SU
940 nm IR diode TSAL 6100 or equivalent
1206 ¼ W resistors (R1 33ohm, R2 330ohm, R3 100ohm, R4 150ohm)
1206 LED (LED2 - activity, LED3 - power status)
Q1 2N2222 surface mount (SOT23 format)
VREG 5V LDO 250mA (MCP1702T-5002E/CB)
1206 1uF capacitor (C1, C2)
SMD Tactile button
Note: only equip 1 IR LED at a time. You can have both installed, however the power output will be halfed.
ERLT Transponder FC 36mm Mount
ERLT LiPO Powered transponder w/ 5V regulator
This project has been race tested and is easy to solder. The transponder support 2s or 3s lipo input (7.4V or 11.1V nominal) or a 5V input. The onboard voltage regulator steps the voltage down to 5V.
Parts List: * Attiny85 ATTINY85-20SU
940 nm IR diode TSAL 6100 or equivalent
1206 ¼ W resistors (R1 33ohm, R2 330ohm, R3 100ohm, R4 150ohm)
1206 LED (LED2 - activity, LED3 - power status)
Q1 2N2222 surface mount (SOT23 format)
VREG 5V LDO 250mA (MCP1702T-5002E/CB)
1206 1uF capacitor (C1, C2)
SMD Tactile button
Note: only equip 1 IR LED at a time. You can have both installed, however the power output will be halfed.