Multi Serial In for Marcduino
author: therooster2001
2 layer board of 0.99 x 1.05 inches (25.1 x 26.7 mm)
Uploaded:
May 14, 2016
Shared:
June 17, 2016
Total Price:
$5.15
Multi Serial Input to the MarcDuino.
Easy way to add multiple serial inputs to the MarcDuino RX pin. Without this board, you can only have one input. This enables the wifly (or newer) and the Dome Bump Controller input to allow the Marcduino to accept up to four connections of serial input. This is NOT i2c, all serial.
You’ll need 4 diodes 1N4148, and (1) 10k resistor, and normal 2.54mm header pins.
Multi Serial Input to the MarcDuino.
Easy way to add multiple serial inputs to the MarcDuino RX pin. Without this board, you can only have one input. This enables the wifly (or newer) and the Dome Bump Controller input to allow the Marcduino to accept up to four connections of serial input. This is NOT i2c, all serial.
You’ll need 4 diodes 1N4148, and (1) 10k resistor, and normal 2.54mm header pins.
