SY1MM

author: rsdio
Top
Bottom

2 layer board of 1.10 x 0.65 inches (27.9 x 16.5 mm)
Uploaded: November 08, 2015
Shared: November 08, 2015
Total Price: $3.55

CV fixed gain, variable offset

This started out as an educational schematic to show how to take a Control Voltage that ranges from 2.2V to 10V, and expand it to cover 0V to 10V. The differential amplifier gain is set by R2/R1 and R4/R3, where the resistors should match. The trim resistor allows 0V to be dialed in.

CV fixed gain, variable offset

This started out as an educational schematic to show how to take a Control Voltage that ranges from 2.2V to 10V, and expand it to cover 0V to 10V. The differential amplifier gain is set by R2/R1 and R4/R3, where the resistors should match. The trim resistor allows 0V to be dialed in.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy