EHA (ESP Home Automation) v1
author: OrestisMokas
2 layer board of 1.00 x 2.03 inches (25.3 x 51.6 mm)
Uploaded:
August 12, 2015
Shared:
August 12, 2015
Total Price:
$10.10
Uses an ESP-01 or ESP-03 to establish a connection with a WiFi network, then ESP serves a webpage that allows you to control relays so you can automate your home. Relays are controlled from atmega328 microcontroller. LCD and anything else can be used if needed. (Use softwareserial and connect ESP’s tx to a virtual RX port on atmega328p. More info soon! Thanks to One Inch of Goodness’s designer (I used his board layout and extended it to my pcb).
Uses an ESP-01 or ESP-03 to establish a connection with a WiFi network, then ESP serves a webpage that allows you to control relays so you can automate your home. Relays are controlled from atmega328 microcontroller. LCD and anything else can be used if needed. (Use softwareserial and connect ESP’s tx to a virtual RX port on atmega328p. More info soon! Thanks to One Inch of Goodness’s designer (I used his board layout and extended it to my pcb).
