Nanjg 105C compatible 20mm LED driver
author: texaspyro
2 layer board of 0.79 x 0.79 inches (20.1 x 20.1 mm)
Uploaded:
January 16, 2014
Shared:
January 25, 2014
Total Price:
$3.10
20mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54 (be careful of the different versions with various diode arrangements).
C1 is 10 uF
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 with Nlite or BLF-VLD firmware. Google for more info on this firmware.
LED connects to the L+ and L- holes.
Outer ring is ground, spring pad is +V
The driver mode configuration “stars” are marked on the spring side of the driver. They are tiny through-hole pads.
Discussion thread here: http://budgetlightforum.com/node/28251
20mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54 (be careful of the different versions with various diode arrangements).
C1 is 10 uF
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 with Nlite or BLF-VLD firmware. Google for more info on this firmware.
LED connects to the L+ and L- holes.
Outer ring is ground, spring pad is +V
The driver mode configuration “stars” are marked on the spring side of the driver. They are tiny through-hole pads.
Discussion thread here: http://budgetlightforum.com/node/28251
