Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

uartv2.zip

author: mnk
Top
Bottom

2 layer board of 1.84 x 0.80 inches (46.7 x 20.3 mm)
Uploaded: October 17, 2016
Shared: October 17, 2016
Total Price: $7.35

uartv2

uartv2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

max811-breakout

author: smbaker
Top
Bottom

2 layer board of 0.84 x 0.50 inches (21.3 x 12.7 mm)
Uploaded: September 30, 2016
Shared: October 17, 2016
Total Price: $2.05

z80 reset board, max811 version

z80 reset board, max811 version

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

z80reset.brd

author: smbaker
Top
Bottom

2 layer board of 1.24 x 0.60 inches (31.4 x 15.2 mm)
Uploaded: September 30, 2016
Shared: October 17, 2016
Total Price: $3.70

z80 reset board, schmitt trigger version

z80 reset board, schmitt trigger version

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

usbthing

author: Merlin04
Top
Bottom

2 layer board of 1.25 x 0.62 inches (31.6 x 15.6 mm)
Uploaded: October 16, 2016
Shared: October 16, 2016
Total Price: $3.80

An ATtiny85-based USB Thing. It can be used with Micronucleus to provide usb programming. It is meant to be a programmable mouse/keyboard (eg. to wiggle the mouse once every few seconds) but you could use it for other things.

Circuit from http://www.instructables.com/id/Digispark-DIY-The-smal…

Show full description

An ATtiny85-based USB Thing. It can be used with Micronucleus to provide usb programming. It is meant to be a programmable mouse/keyboard (eg. to wiggle the mouse once every few seconds) but you could use it for other things.

Circuit from http://www.instructables.com/id/Digispark-DIY-The-smal…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SOIC and SSOP to PTH 16 Pin

author: NeonSilicon
Top
Bottom

2 layer board of 0.83 x 0.63 inches (21.0 x 15.9 mm)
Uploaded: September 08, 2016
Shared: October 16, 2016
Total Price: $2.55

Adaptor board for using 16 pin SOIC or SSOP parts on a breadboard

Adaptor board for using 16 pin SOIC or SSOP parts on a breadboard

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bldc-fan-driver

author: dword1511
Top
Bottom

2 layer board of 0.74 x 1.22 inches (18.8 x 30.9 mm)
Uploaded: September 23, 2016
Shared: October 16, 2016
Total Price: $4.50

MTD6501-based sensorless BLDC motor driver

MTD6501-based sensorless BLDC motor driver

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TK-II-STEREO_INTFC

author: AtariBits
Top
Bottom

2 layer board of 2.31 x 0.91 inches (58.6 x 23.0 mm)
Uploaded: August 17, 2016
Shared: October 15, 2016
Total Price: $10.45

Connector Break-Out Board for use with TK-II-STEREO_MAIN (w/Dual PS2 Jacks)

Connector Break-Out Board for use with TK-II-STEREO_MAIN (w/Dual PS2 Jacks)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TK-II-STEREO_INTFC-S

author: AtariBits
Top
Bottom

2 layer board of 1.61 x 0.91 inches (40.8 x 23.0 mm)
Uploaded: August 23, 2016
Shared: October 15, 2016
Total Price: $7.25

Connector Break-Out Board for use with TK-II-STEREO_MAIN (w/Single PS2 Jack)

Connector Break-Out Board for use with TK-II-STEREO_MAIN (w/Single PS2 Jack)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TK-II-STEREO_MAIN

author: AtariBits
Top
Bottom

2 layer board of 2.18 x 2.05 inches (55.4 x 51.9 mm)
Uploaded: August 23, 2016
Shared: October 15, 2016
Total Price: $22.30

Atari Stereo Dual Pokey w/TK-II PS2 & U-Switch Integrated

Atari Stereo Dual Pokey w/TK-II PS2 & U-Switch Integrated

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RX02 Emulator Shield v3rev1 (DS8641-based version)

author: AK6DN
Top
Bottom

4 layer board of 3.91 x 2.11 inches (99.2 x 53.5 mm)
Uploaded: October 13, 2016
Shared: October 15, 2016
Total Price: $82.20

RX02 Emulator Arduino Mega2560 Shield v3rev1
Documentation & Software: <https://github.com/AK6DN/rx02_emulator>

RX02 Emulator Arduino Mega2560 Shield v3rev1
Documentation & Software: <https://github.com/AK6DN/rx02_emulator>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Prop SBC.zip

author: KD5VMF
Top
Bottom

2 layer board of 2.71 x 2.68 inches (68.8 x 68.1 mm)
Uploaded: October 15, 2016
Shared: October 15, 2016
Total Price: $36.25

[email protected] - TESTED GOOD. Email for BOM and instructions.

text

[email protected] - TESTED GOOD. Email for BOM and instructions.

text

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Touch Key Board, Rev.A

author: arduinopraxis
Top
Bottom

2 layer board of 1.46 x 1.58 inches (37.2 x 40.1 mm)
Uploaded: September 04, 2016
Shared: October 15, 2016
Total Price: $11.55

Touch Key Board, Rev.A

Breakout Board for Touch Applications with AT42QT1070.

Touch Key Board, Rev.A

Breakout Board for Touch Applications with AT42QT1070.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SG4.zip

author: Bill
Top
Bottom

2 layer board of 3.75 x 2.50 inches (95.3 x 63.6 mm)
Uploaded: October 15, 2016
Shared: October 15, 2016
Total Price: $46.90

SG4 Four Phase Sinewave Generator for Turntables

SG4 Four Phase Sinewave Generator for Turntables

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IN14X6_OSH.zip

author: electrofish
Top
Bottom

2 layer board of 5.51 x 1.26 inches (139.9 x 32.0 mm)
Uploaded: October 14, 2016
Shared: October 15, 2016
Total Price: $34.60

IN14 nixie board

IN14 nixie board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kanda.brd

author: czarny
Top
Bottom

2 layer board of 0.99 x 0.80 inches (25.1 x 20.3 mm)
Uploaded: April 05, 2016
Shared: October 15, 2016
Total Price: $3.90

kanda bread board adapter

kanda bread board adapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAMERA DRIVER SMALL v1.1.brd

author: AndrewB
Top
Bottom

2 layer board of 2.25 x 1.55 inches (57.2 x 39.4 mm)
Uploaded: October 15, 2016
Shared: October 15, 2016
Total Price: $17.40

Arduino and stepper driver v1.1 not made or tested see https://sites.google.com/site/andrewscnc/camera/slider

Arduino and stepper driver v1.1 not made or tested see https://sites.google.com/site/andrewscnc/camera/slider

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp_adc_lipo.kicad_pcb

author: alexghiti
Top
Bottom

2 layer board of 1.60 x 0.90 inches (40.7 x 23.0 mm)
Uploaded: June 12, 2016
Shared: October 15, 2016
Total Price: $7.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1554E.brd

author: openVespa
Top
Bottom

2 layer board of 3.09 x 3.05 inches (78.5 x 77.5 mm)
Uploaded: October 15, 2016
Shared: October 15, 2016
Total Price: $47.15

First prototype of DNS board

First prototype of DNS board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Micro Smoothie 2mm to 2.54mm Adapter.brd

author: raykholo
Top
Bottom

2 layer board of 1.50 x 1.70 inches (38.1 x 43.2 mm)
Uploaded: October 15, 2016
Shared: October 15, 2016
Total Price: $12.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

adapterboard_jumper.zip

author: rimalroc
Top
Bottom

2 layer board of 0.50 x 0.99 inches (12.6 x 25.1 mm)
Uploaded: October 14, 2016
Shared: October 14, 2016
Total Price: $2.40

jumper to solder adapter board on stgc

jumper to solder adapter board on stgc

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy