Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

1.3" OLED SSD1306 SPI Breakout v1.0 A

author: golemparts
Top
Bottom

2 layer board of 1.36 x 1.08 inches (34.5 x 27.3 mm)
Uploaded: February 13, 2017
Shared: July 24, 2017
Total Price: $7.30

SPI breakout board for a 1.3" OLED display, driven by an SSD1306. Requires 3.3 V power and logic (not 5 V tolerant).

For more information, including a bill of materials, check out this blog post.

SPI breakout board for a 1.3" OLED display, driven by an SSD1306. Requires 3.3 V power and logic (not 5 V tolerant).

For more information, including a bill of materials, check out this blog post.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mcp73841.brd

author: Nerdz2300
Top
Bottom

2 layer board of 1.30 x 0.89 inches (32.9 x 22.6 mm)
Uploaded: July 22, 2017
Shared: July 24, 2017
Total Price: $5.75

mcp73841 Lithium charger

mcp73841 Lithium charger

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

METARmap v1

author: facialhairtuesday
Top
Bottom

2 layer board of 2.71 x 1.06 inches (68.7 x 26.8 mm)
Uploaded: July 20, 2017
Shared: July 24, 2017
Total Price: $14.25

METARmap Control Board

METARmap Control Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PewPew Lite 1.0

author: deshipu
Top
Bottom

2 layer board of 2.00 x 0.90 inches (50.8 x 22.8 mm)
Uploaded: June 26, 2017
Shared: July 24, 2017
Total Price: $8.95

A game shield for the Adafruit Feather boards. https://hackaday.io/project/21578

A game shield for the Adafruit Feather boards. https://hackaday.io/project/21578

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

hat_fan

author: facelessloser
Top
Bottom

2 layer board of 1.19 x 1.77 inches (30.3 x 45.1 mm)
Uploaded: July 02, 2017
Shared: July 24, 2017
Total Price: $10.55

a way to add a fan to your hats rim with a money clip Blog post - https://facelesstech.wordpress.com/2017/07/30/fan-hat/ Youtube - https://www.youtube.com/watch?v=zjbzD5M7YN0 Github - https://github.com/facelessloser/fan_hat

a way to add a fan to your hats rim with a money clip Blog post - https://facelesstech.wordpress.com/2017/07/30/fan-hat/ Youtube - https://www.youtube.com/watch?v=zjbzD5M7YN0 Github - https://github.com/facelessloser/fan_hat

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DCC_Decoder3P.brd

author: obdev
Top
Bottom

2 layer board of 2.51 x 0.77 inches (63.8 x 19.5 mm)
Uploaded: June 10, 2017
Shared: July 23, 2017
Total Price: $9.60

DCC Accessory Decoder v3P. http://model-railroad-hobbyist.com/node/24316

DCC Accessory Decoder v3P. http://model-railroad-hobbyist.com/node/24316

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARD-DCCSHIELD (v1.3)

author: railfan
Top
Bottom

2 layer board of 2.11 x 2.71 inches (53.6 x 68.8 mm)
Uploaded: July 23, 2017
Shared: July 23, 2017
Total Price: $28.60

Arduino DCC Decoder Shield

Arduino DCC Decoder Shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

W681X.brd

author: vrs42
Top
Bottom

2 layer board of 4.95 x 2.45 inches (125.8 x 62.2 mm)
Uploaded: July 23, 2017
Shared: July 23, 2017
Total Price: $60.60

Scope Intensifier W681

Scope Intensifier W681

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

stm32coolboard

author: mike7b4
Top
Bottom

2 layer board of 2.37 x 1.78 inches (60.1 x 45.3 mm)
Uploaded: July 16, 2017
Shared: July 22, 2017
Total Price: $21.10

STM32 coolboard is arduiono/nucleo32 compatible board with:

  • stm32f042 3.3v with USB, no need for FTDI
  • standard I2C eeprom whatever you choose
  • OLED connector (I2C) adafruit or ebay ripoff comatible (needs testing)
  • dual mosfet connected from fairchild (confirmed working)
  • NRF24LO+ c…

Show full description

STM32 coolboard is arduiono/nucleo32 compatible board with:

  • stm32f042 3.3v with USB, no need for FTDI
  • standard I2C eeprom whatever you choose
  • OLED connector (I2C) adafruit or ebay ripoff comatible (needs testing)
  • dual mosfet connected from fairchild (confirmed working)
  • NRF24LO+ c…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

usb3300-digilent-adapter.kicad_pcb

author: rohitk-singh
Top
Bottom

2 layer board of 0.55 x 1.55 inches (13.9 x 39.3 mm)
Uploaded: January 25, 2017
Shared: July 22, 2017
Total Price: $4.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HEXbus. ATmega128 with LCD

author: klegg
Top
Bottom

2 layer board of 3.11 x 2.71 inches (78.9 x 68.7 mm)
Uploaded: May 05, 2016
Shared: July 22, 2017
Total Price: $42.00

Atmega128 board with ST7735R LCD screen capability.

Features: Ports arranged in actual sequential bit order (backwards though- oops)

FTDI cable port

Two power rails (use either one you wish)

All pins are arranged in .1 inch grid for breadboarding, or prototyping.

Atmega128 board with ST7735R LCD screen capability.

Features: Ports arranged in actual sequential bit order (backwards though- oops)

FTDI cable port

Two power rails (use either one you wish)

All pins are arranged in .1 inch grid for breadboarding, or prototyping.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pockeTETRIS

author: dombeef
Top
Bottom

2 layer board of 1.16 x 1.56 inches (29.4 x 39.5 mm)
Uploaded: May 08, 2017
Shared: July 22, 2017
Total Price: $8.95

Portable Tetris clone based on attiny85

Portable Tetris clone based on attiny85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

d9x.zip

author: ChibiConsulting
Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: July 22, 2017
Shared: July 22, 2017
Total Price: $5.00

Four way DE9 split or tap

Four way DE9 split or tap

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

isp23_.zip

author: ChibiConsulting
Top
Bottom

2 layer board of 2.14 x 0.95 inches (54.4 x 24.1 mm)
Uploaded: July 22, 2017
Shared: July 22, 2017
Total Price: $10.15

Arduino as ICSP programming shield

Arduino as ICSP programming shield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Brushless Motor Driver

author: tjschweizer
Top
Bottom

2 layer board of 3.25 x 2.50 inches (82.6 x 63.5 mm)
Uploaded: February 15, 2016
Shared: July 21, 2017
Total Price: $40.60

Based off of http://willfj.com/bldc-controller-v01/

Based off of http://willfj.com/bldc-controller-v01/

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ME370OpAmp.kicad_pcb

author: tjschweizer
Top
Bottom

2 layer board of 6.93 x 2.96 inches (175.9 x 75.2 mm)
Uploaded: March 22, 2017
Shared: July 21, 2017
Total Price: $102.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Extrudrboard2 REV 2

author: cscott
Top
Bottom

2 layer board of 1.80 x 1.74 inches (45.7 x 44.2 mm)
Uploaded: July 19, 2017
Shared: July 21, 2017
Total Price: $15.60

Extrudrboard multiplexer

Extrudrboard multiplexer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

COFE-POT Standalone Polarization Unit R0

author: nrup15
Top
Bottom

4 layer board of 1.76 x 3.01 inches (44.6 x 76.4 mm)
Uploaded: July 21, 2017
Shared: July 21, 2017
Total Price: $52.70

COFE-POT Standalone Polarization Unit R0

COFE-POT Standalone Polarization Unit R0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pippin Floppy Board Replica 1.0

author: DocTB
Top
Bottom

2 layer board of 4.05 x 1.34 inches (102.9 x 34.0 mm)
Uploaded: May 01, 2017
Shared: July 21, 2017
Total Price: $27.10

A floppy extension board replica for the Apple PIPPIN!, brought to you by Doc TB from the famous french magazine Canard PC Hardware. Tested working. You will need a standard 2x10-pin connector, a standard Apple 20-pin floppy cable and a genuine Apple floppy drive or a floppy emulator (i.e. Floppy…

Show full description

A floppy extension board replica for the Apple PIPPIN!, brought to you by Doc TB from the famous french magazine Canard PC Hardware. Tested working. You will need a standard 2x10-pin connector, a standard Apple 20-pin floppy cable and a genuine Apple floppy drive or a floppy emulator (i.e. Floppy…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sonassist_V0.1polygon

author: simon_merrett
Top
Bottom

2 layer board of 6.08 x 10.00 inches (154.4 x 253.9 mm)
Uploaded: July 21, 2017
Shared: July 21, 2017
Total Price: $303.80

Using KiCAD line/polygon tool

Using KiCAD line/polygon tool

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy