Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

3 Pin 2mm JST Breakout Board

author: BananaGuns
Top
Bottom

2 layer board of 0.34 x 0.32 inches (8.7 x 8.0 mm)
Uploaded: November 21, 2016
Shared: November 21, 2018
Total Price: $0.50

Breakout Board for 2mm 3 Pin JST Connector to allow access to a 2S LiPo's balancing leads and allow charging via a Hobby King DC-4S and custom charging cable!

Breakout Board for 2mm 3 Pin JST Connector to allow access to a 2S LiPo's balancing leads and allow charging via a Hobby King DC-4S and custom charging cable!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Limit Switch Breakout

author: BananaGuns
Top
Bottom

2 layer board of 0.46 x 0.50 inches (11.6 x 12.6 mm)
Uploaded: February 15, 2018
Shared: November 21, 2018
Total Price: $1.10

Very simple limit switch breakout for DIY CD ROM 3D printer, plotter, etc. Connect 5v and ground to corresponding pads if you want the arduino pin to be pulled to ground when the switch isnt engaged, or reverse the polarity if you'd like it to be pulled high(the latter is the better option). the …

Show full description

Very simple limit switch breakout for DIY CD ROM 3D printer, plotter, etc. Connect 5v and ground to corresponding pads if you want the arduino pin to be pulled to ground when the switch isnt engaged, or reverse the polarity if you'd like it to be pulled high(the latter is the better option). the …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Dreamcast SATA for VA1

author: jskyboo
Top
Bottom

2 layer board of 1.94 x 4.05 inches (49.4 x 102.8 mm)
Uploaded: November 20, 2018
Shared: November 20, 2018
Total Price: $39.30

BOM:

  • U1: JM20330 TQFP
  • U2: LT1963EST-1.8#PBF
  • U3: LT1963EST-3.3#PBF
  • Y1: ECS-250-18-5PLX-AGN-TR
  • J1: 200529-0080
  • R2: 12k Ohm 1% 0603
  • R1, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18: 33 Ohm 0603
  • R19: 1M Ohm 0603
  • R20, R24, R28, R30: 10k Ohm 0603…

Show full description

BOM:

  • U1: JM20330 TQFP
  • U2: LT1963EST-1.8#PBF
  • U3: LT1963EST-3.3#PBF
  • Y1: ECS-250-18-5PLX-AGN-TR
  • J1: 200529-0080
  • R2: 12k Ohm 1% 0603
  • R1, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18: 33 Ohm 0603
  • R19: 1M Ohm 0603
  • R20, R24, R28, R30: 10k Ohm 0603…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NixieClockDisplay_2018-11-20_OSH

author: jiggermole
Top
Bottom

2 layer board of 2.76 x 3.01 inches (70.1 x 76.5 mm)
Uploaded: November 20, 2018
Shared: November 20, 2018
Total Price: $41.55

First testing board for a nixie clock display. initial using only 3 digits to prototype the controls Separate board has power supplies and adafruit feather to control the MAX6922 driving the tubes.

First testing board for a nixie clock display. initial using only 3 digits to prototype the controls Separate board has power supplies and adafruit feather to control the MAX6922 driving the tubes.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Triple prototype 2 untested

author: staticx57
Top
Bottom

2 layer board of 0.68 x 0.68 inches (17.2 x 17.2 mm)
Uploaded: November 09, 2018
Shared: November 20, 2018
Total Price: $2.25

Pad sizes 0603

Pad sizes 0603

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

4CHAMP Rev B

author: jdc_idlab
Top
Bottom

4 layer board of 1.65 x 1.65 inches (41.8 x 41.8 mm)
Uploaded: October 17, 2018
Shared: November 20, 2018
Total Price: $27.00

4ChAmp Board - DC coupled Amplifier board: THS3202 Amplifier board -3dB Bandwidth : 578MHz

4ChAmp Board - DC coupled Amplifier board: THS3202 Amplifier board -3dB Bandwidth : 578MHz

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Prototype Rev 2 Power Supply for 5850 FAO control circuit

author: Altronic-Research-Inc
Top
Bottom

2 layer board of 3.43 x 2.68 inches (87.1 x 68.0 mm)
Uploaded: November 20, 2018
Shared: November 20, 2018
Total Price: $45.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PTH

author: Greg-S-Jolley
Top
Bottom

2 layer board of 1.30 x 0.40 inches (33.1 x 10.1 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $2.55

LPS25H and Si7031 sensor board

LPS25H and Si7031 sensor board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MI Hall Sample Mount v1

author: lenferink
Top
Bottom

2 layer board of 0.91 x 0.60 inches (23.1 x 15.1 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $2.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy AV

author: Gopher
Top
Bottom

2 layer board of 5.46 x 2.06 inches (138.6 x 52.2 mm)
Uploaded: November 19, 2018
Shared: November 19, 2018
Total Price: $56.05

Teensy 3.5/3.6 capable PCB with Touchscreen, Audio Board socket, and three rotary encoders

https://github.com/compeoree/TeensyAV

Teensy 3.5/3.6 capable PCB with Touchscreen, Audio Board socket, and three rotary encoders

https://github.com/compeoree/TeensyAV

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Saleae_USB_interrogator.kicad_pcb

author: N.Boers
Top
Bottom

2 layer board of 1.57 x 0.60 inches (39.8 x 15.2 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $4.65

Adaptor board for a tidy connection of a Saleae Logic analyzer to USB A's. P1 is SMD USB A plug. P2 is through hole USB A receptacle. P3 is straight pin headers. P4 is right angle header sockets. LED D1 and R1 are for 5v power indication.

Adaptor board for a tidy connection of a Saleae Logic analyzer to USB A's. P1 is SMD USB A plug. P2 is through hole USB A receptacle. P3 is straight pin headers. P4 is right angle header sockets. LED D1 and R1 are for 5v power indication.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB LED stip driver V0.2

author: PlatinumFusion
Top
Bottom

2 layer board of 1.76 x 1.18 inches (44.7 x 30.0 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $10.35

To Drive a 12V LED strip from an Arduino/MCU

This Board has NOT been tested

To Drive a 12V LED strip from an Arduino/MCU

This Board has NOT been tested

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bml_pmod_to_hdmi_24color_ddr_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 1.56 x 1.43 inches (39.6 x 36.4 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $11.10

dual-PMOD to 24bit DVI color using TFP410 PHY from TI.

dual-PMOD to 24bit DVI color using TFP410 PHY from TI.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CDI Rgb Expansion

author: FrankStrasser
Top
Bottom

2 layer board of 1.52 x 1.15 inches (38.7 x 29.1 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $8.70

Just a simple board to wire rgb from the encoder(of models of cdi consoles with the cxa1145 encoder)to your choice of connector(preferably an 8 pin mini din). To be used with a pass through scart cable with no components inside. The positive side of all the caps should be facing the resistors, th…

Show full description

Just a simple board to wire rgb from the encoder(of models of cdi consoles with the cxa1145 encoder)to your choice of connector(preferably an 8 pin mini din). To be used with a pass through scart cable with no components inside. The positive side of all the caps should be facing the resistors, th…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AY_PCB - CADCAM.ZIP

author: noid
Top
Bottom

2 layer board of 1.56 x 1.97 inches (39.6 x 50.0 mm)
Uploaded: September 01, 2016
Shared: November 18, 2018
Total Price: $15.30

AY-3-8910 emulator on STM32

AY-3-8910 emulator on STM32

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

debuzz

author: autotelic
Top
Bottom

2 layer board of 1.30 x 0.80 inches (33.0 x 20.4 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $5.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flow Driver (Version 2)

author: cera-tops
Top
Bottom

2 layer board of 3.32 x 2.09 inches (84.2 x 53.1 mm)
Uploaded: November 18, 2018
Shared: November 18, 2018
Total Price: $34.60

A stepper motor controller for use with continuous flow 3D Printing.

More information at http://openprojects.bryancera.com

A stepper motor controller for use with continuous flow 3D Printing.

More information at http://openprojects.bryancera.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CheapBus Breakout Board

author: ab0tj
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.2 x 100.2 mm)
Uploaded: November 17, 2018
Shared: November 17, 2018
Total Price: $77.70

Breakout board for CheapBus, with built in logic probe. Headers and spacing are compatible with Tek P6417/6418 logic analyzer probes

Breakout board for CheapBus, with built in logic probe. Headers and spacing are compatible with Tek P6417/6418 logic analyzer probes

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pi85

author: ab0tj
Top
Bottom

2 layer board of 3.94 x 3.94 inches (100.2 x 100.2 mm)
Uploaded: November 17, 2017
Shared: November 17, 2018
Total Price: $77.70

8085 system using RasPi Zero as I/O

8085 system using RasPi Zero as I/O

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino-Pro-Mini

author: Jetty
Top
Bottom

2 layer board of 0.73 x 1.33 inches (18.5 x 33.8 mm)
Uploaded: November 17, 2018
Shared: November 17, 2018
Total Price: $4.80

Sparkfun Arduino Pro 328 Mini - Students

Sparkfun Arduino Pro 328 Mini - Students

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy