Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

kaka01

author: sonia
Top
Bottom

2 layer board of 1.61 x 1.71 inches (40.8 x 43.3 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $13.70

This is the subcircuit of the reset circuit for SNSPDs that will test if the latched nanowire can drive the LED through two FETs

This is the subcircuit of the reset circuit for SNSPDs that will test if the latched nanowire can drive the LED through two FETs

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kea01

author: sonia
Top
Bottom

2 layer board of 1.61 x 1.71 inches (40.8 x 43.3 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $13.70

Testing the ability of the two inverters to drive the LED

Testing the ability of the two inverters to drive the LED

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kiwi01

author: sonia
Top
Bottom

2 layer board of 1.61 x 1.71 inches (40.8 x 43.3 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $13.70

Subcircuit of SNSPD reset circuit that will test if the latching SNSPD can turn on a FET

Subcircuit of SNSPD reset circuit that will test if the latching SNSPD can turn on a FET

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Uno Pedal Platform

author: jfann
Top
Bottom

2 layer board of 2.13 x 2.56 inches (54.0 x 65.0 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $27.20

based on the ElectroSmash pedalShield

based on the ElectroSmash pedalShield

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Trout05

author: sonia
Top
Bottom

2 layer board of 1.60 x 1.61 inches (40.7 x 40.8 mm)
Uploaded: September 08, 2020
Shared: September 09, 2020
Total Price: $12.85

2 wire measurements of SMD resistors and transistors with updates

2 wire measurements of SMD resistors and transistors with updates

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

trout04

author: sonia
Top
Bottom

2 layer board of 1.60 x 1.60 inches (40.7 x 40.7 mm)
Uploaded: September 08, 2020
Shared: September 09, 2020
Total Price: $12.80

4 wire measurements

4 wire measurements

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WiiChuck

author: jwhitehorn
Top
Bottom

2 layer board of 1.08 x 0.26 inches (27.4 x 6.6 mm)
Uploaded: April 14, 2013
Shared: September 09, 2020
Total Price: $1.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cambridge Z88 rs232 to "Model T" rs232

author: Brian_K_White
Top
Bottom

2 layer board of 1.38 x 0.47 inches (35.0 x 12.0 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $3.25

github.com/bkw777/Z88_RS232

This plugs in to the serial port on a Cambridge Z88 (which has a non-standard pinout), and provides a serial port with the same wiring pinout and physical connector as the Kyotronic KC-85 clone machines. (TRS-80 Model 100, 102…

Show full description

github.com/bkw777/Z88_RS232

This plugs in to the serial port on a Cambridge Z88 (which has a non-standard pinout), and provides a serial port with the same wiring pinout and physical connector as the Kyotronic KC-85 clone machines. (TRS-80 Model 100, 102…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Cambridge Z88 to PC rs232

author: Brian_K_White
Top
Bottom

2 layer board of 1.18 x 0.31 inches (30.0 x 8.0 mm)
Uploaded: September 09, 2020
Shared: September 09, 2020
Total Price: $1.85

github.com/bkw777/Z88_RS232

The converts the non-standard serial port on a Cambridge Z88 to a standard RS-232 port. (9 pin, male, DTE)

github.com/bkw777/Z88_RS232

The converts the non-standard serial port on a Cambridge Z88 to a standard RS-232 port. (9 pin, male, DTE)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GoPro Mounting Board

author: thecodewarrior
Top
Bottom

2 layer board of 0.81 x 0.81 inches (20.5 x 20.5 mm)
Uploaded: September 01, 2020
Shared: September 09, 2020
Total Price: $3.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

GoPro Switch Controller

author: thecodewarrior
Top
Bottom

2 layer board of 1.61 x 0.81 inches (40.8 x 20.5 mm)
Uploaded: September 01, 2020
Shared: September 09, 2020
Total Price: $6.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Scart Board w/ resistors & Caps on RGB Inputs

author: citrus3000psi
Top
Bottom

2 layer board of 1.52 x 0.92 inches (38.7 x 23.3 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $6.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kangaroo02

author: sonia
Top
Bottom

2 layer board of 1.61 x 1.71 inches (40.8 x 43.3 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $13.70

reset pcb version 2

reset pcb version 2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

I2c Dimmer

author: Kataktok
Top
Bottom

2 layer board of 1.77 x 1.11 inches (45.0 x 28.2 mm)
Uploaded: October 11, 2019
Shared: September 08, 2020
Total Price: $9.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AS5601 breakout board to be used with 15mm copper fittings

author: elmot
Top
Bottom

2 layer board of 0.59 x 0.59 inches (15.1 x 15.1 mm)
Uploaded: June 02, 2019
Shared: September 08, 2020
Total Price: $1.75

WARNING! The outer diameter is 0.1 mm too big.

WARNING! The outer diameter is 0.1 mm too big.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sensor_only

author: elmot
Top
Bottom

2 layer board of 0.60 x 0.60 inches (15.2 x 15.1 mm)
Uploaded: February 07, 2019
Shared: September 08, 2020
Total Price: $1.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flash Adapter Bottom

author: nicolasnoble
Top
Bottom

2 layer board of 1.59 x 0.90 inches (40.5 x 22.9 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $7.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flash Adapter Top

author: nicolasnoble
Top
Bottom

2 layer board of 1.59 x 0.90 inches (40.5 x 22.9 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $7.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MIMIK Smart Card Analyzer *UNTESTED*

author: b-etz
Top
Bottom

2 layer board of 4.53 x 2.13 inches (115.1 x 54.0 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $48.15

ISO/IEC 7816-compliant smart card sniffer/emulator. Intended for open source security research and penetration testing. Requires 0.8mm thickness. Design is untested – use at your own risk. BOM will be posted once verified to NOT release magic smoke, but you can probably get the gist from the Ger…

Show full description

ISO/IEC 7816-compliant smart card sniffer/emulator. Intended for open source security research and penetration testing. Requires 0.8mm thickness. Design is untested – use at your own risk. BOM will be posted once verified to NOT release magic smoke, but you can probably get the gist from the Ger…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LTO BMS Adapter

author: bradleyb
Top
Bottom

2 layer board of 0.53 x 1.34 inches (13.6 x 34.0 mm)
Uploaded: September 08, 2020
Shared: September 08, 2020
Total Price: $3.55

Use the thinner board (0.8mm)

Use the thinner board (0.8mm)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy