Ninigi PC-MDJ-401-4P-E Breakout v0.2
author: TSayles
2 layer board of 1.02 x 1.52 inches (25.8 x 38.5 mm)
Uploaded:
August 20, 2014
Shared:
August 20, 2014
Total Price:
$7.65
Breakout board for Ninigi PC-MDJ-401-4P-E DC Power Connector @Upverter.com
Breakout board for Ninigi PC-MDJ-401-4P-E DC Power Connector @Upverter.com
LQFP48 to DIP Breakout Board
author: andyolivares
2 layer board of 2.50 x 0.79 inches (63.4 x 20.1 mm)
Uploaded:
February 05, 2014
Shared:
August 20, 2014
Total Price:
$9.85
LQFP48 to DIP Breakout Board
LQFP48 to DIP Breakout Board
BTRelay Rev A
author: andyolivares
2 layer board of 1.97 x 2.56 inches (50.0 x 65.0 mm)
Uploaded:
January 21, 2013
Shared:
August 20, 2014
Total Price:
$25.20
Bluetooth Controlled Relay
Bluetooth Controlled Relay
36mm Power Distribution Board Rev1.1
author: TimJC
2 layer board of 1.42 x 1.42 inches (36.0 x 36.0 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$10.05
36mm Multirotor PDB
Ground terminals are located in the corners, and high current items (ESCs) should be soldered to the side with the minus symbol (-). The exposed ground pads on the opposite side of the board should only be used for low current draw applications (e.g. video equipment, 3.3/5…
Show full description
36mm Multirotor PDB
Ground terminals are located in the corners, and high current items (ESCs) should be soldered to the side with the minus symbol (-). The exposed ground pads on the opposite side of the board should only be used for low current draw applications (e.g. video equipment, 3.3/5…
Show full description
ispogo-landing
author: Kingswood
2 layer board of 1.12 x 0.92 inches (28.4 x 23.3 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$5.10
Landing pattern for ISP single in line 6-pin pogo adapter.
Not very useful except to show the minimal size of the pogo landing pads (7.5x1.25 mm). Two vias make contact with the longer power pins and are used for alignment and orientation.
Landing pattern for ISP single in line 6-pin pogo adapter.
Not very useful except to show the minimal size of the pogo landing pads (7.5x1.25 mm). Two vias make contact with the longer power pins and are used for alignment and orientation.
ispogo
author: Kingswood
2 layer board of 1.06 x 0.39 inches (26.9 x 9.9 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$2.05
ISP single in line 6-pin pogo adapter for AVRs.
This updated version fixes a drill size issue and puts pin numbers on the silkscreen. It also makes it clearer that pins 2 and 6 should be slightly longer so as to make contact first. These two pins (VCC and GND) hit the alignment vias on the ta…
Show full description
ISP single in line 6-pin pogo adapter for AVRs.
This updated version fixes a drill size issue and puts pin numbers on the silkscreen. It also makes it clearer that pins 2 and 6 should be slightly longer so as to make contact first. These two pins (VCC and GND) hit the alignment vias on the ta…
Show full description
36mm Power Distribution Board Rev2.1
author: TimJC
2 layer board of 1.42 x 1.42 inches (36.0 x 36.0 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$10.05
36mm Multirotor PDB
30.5mm M3 mounting holes for 36mm flight controllers like Naze32, Flip32, CC3d, etc.
Not compatible with 50mm FCs, like KK2.
The pin headers are added to allow the connection of a 5V UBEC to the pads above the cut out. The pads above that allow for ground, +V (~12v o…
Show full description
36mm Multirotor PDB
30.5mm M3 mounting holes for 36mm flight controllers like Naze32, Flip32, CC3d, etc.
Not compatible with 50mm FCs, like KK2.
The pin headers are added to allow the connection of a 5V UBEC to the pads above the cut out. The pads above that allow for ground, +V (~12v o…
Show full description
3x3A Zener Modified MT-G2 Driver
author: Mattaus
2 layer board of 1.27 x 1.27 inches (32.3 x 32.3 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$8.05
32mm, 24xAMC Linear Regulator, Zener modified. Triple 3A LED- connection.
32mm, 24xAMC Linear Regulator, Zener modified. Triple 3A LED- connection.
PIDDYBOT_V4_BT_Final
author: idlehandsdev
2 layer board of 1.89 x 2.95 inches (48.0 x 75.0 mm)
Uploaded:
August 19, 2014
Shared:
August 19, 2014
Total Price:
$27.85
PIDDYBOT with BLUETOOTH!
PIDDYBOT with BLUETOOTH!
XMEGA A1 Breakout
author: the-hat
2 layer board of 1.01 x 4.31 inches (25.6 x 109.4 mm)
Uploaded:
November 21, 2013
Shared:
August 19, 2014
Total Price:
$21.65
USB, voltage regulator, and breakout board for AVR XMEGA A1 series MCU
Bill of materials: http://noxvault.org/misc/xmega-a1-breakout-r2.csv
USB, voltage regulator, and breakout board for AVR XMEGA A1 series MCU
Bill of materials: http://noxvault.org/misc/xmega-a1-breakout-r2.csv
