RC XT Charging and Balance Board BOM Parts list for one (1) PCB

Note: There are two different versions of XH headers: one with a tab and one without. The one listed below is the one without the tab. The tabbed one will not fit. The crimp allows for 22AWG wire to be used as the smallest size. There is another version that will fit 26AWG Wire as a minimum. My version uses 22AWG wire but smaller wire will also work. XT connectors need to be trimmed so they bottom does not stick out too far past the board.

7x JST-XH Connector Crimp: SXH-001T-P0.6 http://www.digikey.com/product-detail/en/SXH-001T-P0.6/455-1135-1-ND/527370

1x JST-XH 7 Position Female Connector Housing: XHP-7 http://www.digikey.com/product-search/en?mpart=XHP-7&vendor=455

1x JST-XH 3 Position Male Header: B3B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B3B-XH-A%28LF%29%28SN%29&vendor=455

1x JST-XH 4 Position Male Header: B4B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B4B-XH-A%28LF%29%28SN%29&vendor=455

1x JST-XH 5 Position Male Header: B5B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B5B-XH-A%28LF%29%28SN%29&vendor=455

1x JST-XH 6 Position Male Header: B6B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B6B-XH-A%28LF%29%28SN%29&vendor=455

1x JST-XH 7 Position Male Header: B7B-XH-A(LF)(SN) http://www.digikey.com/product-search/en?mpart=B7B-XH-AM%28LF%29%28SN%29&vendor=455

1x Barrel Connector 2.1mm Male: PJ-037AH http://www.digikey.com/product-detail/en/PJ-037AH/CP-037AH-ND/1644547

1x Amass XT30 Male

1x Amass XT60 Male

1x Amass XT90 Male

1x Pair of Banana Plugs http://www.amazon.com/gp/product/B007QUYQSY?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

Recommended wire: 16AWG or 14AWG for main power and 22AWG or 24AWG for balance lead.