Swedish Vaper PWM 555 PotBelly v3
author: SwedishVaper
2 layer board of 0.53 x 0.53 inches (13.5 x 13.5 mm)
Uploaded:
October 31, 2016
Shared:
November 22, 2016
Total Price:
$1.40
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
Any previous projects that are now deleted are used at your own risk.)
This is a PWM board with NO reverse polarity protection.
This is a buffered circuit, good for up to 4S.
Recommended potentiometer value: 50K
Pot is mounted on the side with the timer IC.
Parts list:
1 x 0603 15K resistor
1 x 0603 0.1uF capacitor
1 x 0603 0.01uF capacitor
1 x BAT54S dual diode (SOT23 package)
1 x SOT23 pfet
1 x SOIC-8 555 timer IC
1 x 3-pin through hole potentiometer, 50K Model 93 recommended
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
Any previous projects that are now deleted are used at your own risk.)
This is a PWM board with NO reverse polarity protection.
This is a buffered circuit, good for up to 4S.
Recommended potentiometer value: 50K
Pot is mounted on the side with the timer IC.
Parts list:
1 x 0603 15K resistor
1 x 0603 0.1uF capacitor
1 x 0603 0.01uF capacitor
1 x BAT54S dual diode (SOT23 package)
1 x SOT23 pfet
1 x SOIC-8 555 timer IC
1 x 3-pin through hole potentiometer, 50K Model 93 recommended
