Break out board to adapt a Sparkfun COM-08184 Navigation switch so that it can be used to replace the Sega Nomad bridghtness control when installing an RGBDRV LCD display driver board.

Order in 0.8mm thickness

See https://www.youtube.com/watch?v=vkLhK-a1clw

• Connect the top pad on the rgbdrv board (CN5) to position 1 on the breakout board.
• Connect the second pad on the rgbdrv board to position T on the breakout board.
• Connect the third pad on the rgbdrv board to position 2 on the breakout board
• Connect the last pad on the rgbdrv board to position C on the breakout board. Be careful to ensure that you do not have the last pad on the rgbdrv board connected to another pad, otherwise you may damage the rgbdrv switching capabilities.

I made this because I couldn’t find the breakout board referenced in the video