2 layer board of 0.48 x 0.48 inches (12.1 x 12.1 mm)
Uploaded:
February 21st 2014
Shared:
February 21st 2014
Total Price:
$1.10
12mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K…
12mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 or similar
LED connects to the + and – holes.
Outer ring is ground. Battery plus connects to + from the reverse side.
The driver mode configuration “stars” are marked 2 to 4 on the MCU side of the driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K…
12mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54.
C1 is 10 uF.
Resistors are 19.1K and 4.7K, 1%
Regulator chips are AMC7135
Processor is ATTINY13 or similar
LED connects to the + and – holes.
Outer ring is ground. Battery plus connects to + from the reverse side.
The driver mode configuration “stars” are marked 2 to 4 on the MCU side of the driver.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.