SquishBox v4.3
author: white2rnado
2 layer board of 2.10 x 1.29 inches (53.2 x 32.7 mm)
Uploaded:
October 25, 2021
Shared:
October 25, 2021
Total Price:
$13.45
PCB for the SquishBox, a Raspberry Pi-powered FluidSynth MIDI sound module. Plugs onto the Raspberry Pi GPIO header and provides a 16x2 character LCD, PCM5102 audio outputs, inputs for stompbuttons and/or a rotary encoder, and an LED. Can be 5V or 9V-powered.
Header pin connections/description:
| pin | GPIO | intended use |
|---|---|---|
| L | 2 | left encoder pin or left momentary button |
| R | 3 | right encoder pin or right momentary button |
| P | 27 | rotary encoder pushbutton pin |
| S | 22 | software callback momentary button |
| led | 10 | LED anode (through 330 Ohm resistor) |
Documentation: Geek Funk Labs
Code: GitHub
Store Link: Tindie
PCB for the SquishBox, a Raspberry Pi-powered FluidSynth MIDI sound module. Plugs onto the Raspberry Pi GPIO header and provides a 16x2 character LCD, PCM5102 audio outputs, inputs for stompbuttons and/or a rotary encoder, and an LED. Can be 5V or 9V-powered.
Header pin connections/description:
| pin | GPIO | intended use |
|---|---|---|
| L | 2 | left encoder pin or left momentary button |
| R | 3 | right encoder pin or right momentary button |
| P | 27 | rotary encoder pushbutton pin |
| S | 22 | software callback momentary button |
| led | 10 | LED anode (through 330 Ohm resistor) |
Documentation: Geek Funk Labs
Code: GitHub
Store Link: Tindie
