HeavyWingV1
author: GamingNJncos
2 layer board of 2.39 x 1.16 inches (60.6 x 29.5 mm)
Uploaded:
July 03, 2021
Shared:
September 04, 2022
Total Price:
$13.85
Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)
Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed for basic functionality once code is updated to remove other features.
Tilt Sensor is HiLetgo GY-521 or clone (Must support ~4v or require modification to power circuit)
Standard I2c OLED can be added to +/- and SDA/SCL Pins - Header will be included in next pcb revision
Known Issues:
A. The Rumble circuit is wired incorrectly so leaving off parts list as it may change in next revision
- The Tilt sensor while completely functional on circuit is disabled in initial release of code. I really suck at kalman filters and the initial code released is missing the custom key combo mechanism for TILT ON/OFF.
Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)
Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed for basic functionality once code is updated to remove other features.
Tilt Sensor is HiLetgo GY-521 or clone (Must support ~4v or require modification to power circuit)
Standard I2c OLED can be added to +/- and SDA/SCL Pins - Header will be included in next pcb revision
Known Issues:
A. The Rumble circuit is wired incorrectly so leaving off parts list as it may change in next revision
- The Tilt sensor while completely functional on circuit is disabled in initial release of code. I really suck at kalman filters and the initial code released is missing the custom key combo mechanism for TILT ON/OFF.
