Osborne 1 Floppy Adapter V1.1

author: WayneVisser
Top
Bottom

2 layer board of 1.47 x 1.80 inches (37.4 x 45.7 mm)
Uploaded: August 15, 2020
Shared: October 10, 2020
Total Price: $13.20

This adapter couples the non-standard Shugart-like floppy interface on an Osborne 1 to a floppy emulator like the GoTek.

The GoTek can be configured as Drive A or B via a jumper on the adapter.

GoTek part number is SFR1M44-U100K Jumper only S1 on the GoTek.

Connector on the GoTek side is Sullins PPPC172LJBN-RC

+5v for the GoTek is taken from the floppy cable.

https://github.com/WayneVisser/Osborne1FloppyAdapter

This adapter couples the non-standard Shugart-like floppy interface on an Osborne 1 to a floppy emulator like the GoTek.

The GoTek can be configured as Drive A or B via a jumper on the adapter.

GoTek part number is SFR1M44-U100K Jumper only S1 on the GoTek.

Connector on the GoTek side is Sullins PPPC172LJBN-RC

+5v for the GoTek is taken from the floppy cable.

https://github.com/WayneVisser/Osborne1FloppyAdapter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy