WonderSwan Link Cable To FTDI 3.3V USB-TTL Cable Adapter

author: up-n-atom
Top
Bottom

2 layer board of 0.40 x 0.84 inches (10.1 x 21.3 mm)
Uploaded: April 10, 2021
Shared: May 05, 2021
Total Price: $1.65

Assembly

  1. Solder 3-pin 90° 2.54mm male header or 3-pin 90° 2.54mm female socket.

Usage

  1. Use an authentic FTDI, such as SparkFun USB to TTL Serial Cable
  2. Download and launch FT Prog
  3. Check Pull-down I/O Pins, High Current I/O, Invert TXD, Invert RXD.
  4. Program Device.
  5. Match USB-TTL cable to silkscreen and connect.
  6. Plug into link cable (Gold WonderSwan logo on Sammy logo side of link cable).

Assembly

  1. Solder 3-pin 90° 2.54mm male header or 3-pin 90° 2.54mm female socket.

Usage

  1. Use an authentic FTDI, such as SparkFun USB to TTL Serial Cable
  2. Download and launch FT Prog
  3. Check Pull-down I/O Pins, High Current I/O, Invert TXD, Invert RXD.
  4. Program Device.
  5. Match USB-TTL cable to silkscreen and connect.
  6. Plug into link cable (Gold WonderSwan logo on Sammy logo side of link cable).
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy