Differential Solar Controller
author: marssystems
2 layer board of 2.09 x 2.35 inches (53.1 x 59.7 mm)
Uploaded:
May 16, 2020
Shared:
May 19, 2020
Total Price:
$24.55
Arduino-based differential solar controller
An Arduino (Uno or similar – compatible with standard Arduino ‘shields’)
BOM (Digikey)
2 x 1287K-ND, Quickfit Terminals
1 x 1N4148, Diode
1 x Z139-ND, Relay
1 x 1514-2N2222APBFREE-ND TRANS NPN 40V 0.8A TO-18
1 x 311-10.0KFRCT-ND, 10K Resistor
1 x 311-4.70KFRCT-ND, 4.7K Resistor
1 x 380-1046-ND, 8P8C Jack
1 x 445-2525-1-ND, Piezzo Buzzer
1 x 490-3811-ND, 0.1uF Capacitor
2 x 67-1120-ND, Red LED
2 x 67-1119-ND, Green LED
1 x 770-61-R150P-ND, Resistor Network
1 x S1012E-30-ND, 30-position header pins (break into 4 smaller pieces)
4 x DS18S20+CT-ND, 1-Wire Temperature Sensors
Arduino-based differential solar controller
An Arduino (Uno or similar – compatible with standard Arduino ‘shields’)
BOM (Digikey)
2 x 1287K-ND, Quickfit Terminals
1 x 1N4148, Diode
1 x Z139-ND, Relay
1 x 1514-2N2222APBFREE-ND TRANS NPN 40V 0.8A TO-18
1 x 311-10.0KFRCT-ND, 10K Resistor
1 x 311-4.70KFRCT-ND, 4.7K Resistor
1 x 380-1046-ND, 8P8C Jack
1 x 445-2525-1-ND, Piezzo Buzzer
1 x 490-3811-ND, 0.1uF Capacitor
2 x 67-1120-ND, Red LED
2 x 67-1119-ND, Green LED
1 x 770-61-R150P-ND, Resistor Network
1 x S1012E-30-ND, 30-position header pins (break into 4 smaller pieces)
4 x DS18S20+CT-ND, 1-Wire Temperature Sensors
