Simple Nixie Tube PCB for dual 14 in tubes
author: Cheddar0811
2 layer board of 2.34 x 2.30 inches (59.4 x 58.4 mm)
Uploaded:
November 21, 2016
Shared:
November 21, 2016
Total Price:
$26.85
This is a simple chip to run two nixie tubes with a shift register. Please be aware that the resistor value may be different depending on your circuit.
Parts list:
-1 shift register
-2 nixie tube driving chips (74141 or clone)
-2 resistors usually 16k to 50k
-3 capacitors .01 uF
The holes on the upper left side of the board are for micro-controller pins, 5v and GND.
This is a simple chip to run two nixie tubes with a shift register. Please be aware that the resistor value may be different depending on your circuit.
Parts list:
-1 shift register
-2 nixie tube driving chips (74141 or clone)
-2 resistors usually 16k to 50k
-3 capacitors .01 uF
The holes on the upper left side of the board are for micro-controller pins, 5v and GND.
