Micro USB power for "New" 3DS XL

By tetsujin

2 layer board of 0.60 x 0.33 inches (15.2 x 8.5 mm).
Shared on August 21st, 2016 07:48

Board is designed for a TOP MOUNT micro USB connector! This is important! Wrong connector = wrong power polarity!

To fit properly inside the system, this board should be fabricated at 0.8mm thickness.

People are free to use or alter this design as they see fit, but do with caution, and at your own risk.


Micro USB power for "New" 3DS XL

By tetsujin

2 layer board of 0.60 x 0.33 inches (15.2 x 8.5 mm).
Shared on August 21st, 2016 07:48

Board is designed for a TOP MOUNT micro USB connector! This is important! Wrong connector = wrong power polarity!

To fit properly inside the system, this board should be fabricated at 0.8mm thickness.

People are free to use or alter this design as they see fit, but do with caution, and at your own risk.